BaltLED TRERON Installation Manual

TRERON LUMINAIRES
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING
INSIDE THE BOX
WARNING
! Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
• Perform installation in dry location only.
• Luminaire may fall down if not installed properly.
• Avoid direct eye exposure to the light source while it is on.
• For indoor use only.
• Do not operate luminaire with damaged parts.
• To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
© 2020, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
1 /
www.baltled.com
4
st
1 July, 2020
INSTALLATION GUIDE
NEEDED FOR MOUNTING
• The manufacturer shall not be liable for any damage
resulting from inappropriate modifications to the
luminaire or faulty installation.
If you have any questions, contact the manufacturer.
STANDARD VERSION
L, mm W, mm H, mm
600 / 1200 51 53
LINKABLE VERSION
L, mm W, mm H, mm
609 / 1209 51 53