BaltLED BWLH-02584060 Installation Manual

FULMAR INDUSTRIAL LUMINAIRES
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING
INSIDE THE BOX
mm
L,
252 / 277 / 520 / 1007 / 1010 / 1506 / 2010
WARNING
! Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
• Perform installation in dry location only.
• Luminaire may fall down if not installed properly.
• Avoid direct eye exposure to the light source while it is on.
• For indoor use only.
• Do not operate luminaire with damaged parts.
• To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
1 /
www.baltled.com
4
th
26 October, 2018
NEEDED FOR MOUNTING
mm mm
W, H,
75 75*
INSTALLATION GUIDE
*Fulmar luminaires are the same height except for Fulmar H 120
and Fulmar HT 120, which H = 100 mm
• The manufacturer shall not be liable for any damage
resulting from inappropriate modifications to the
luminaire or faulty installation.
If you have any questions, contact the manufacturer.