Updates & Servicing - Stack Audio LINK II User Manual

Step 1. Select Audio output USB
Step 2: Configure Initial Volume
Step 3: Type in your Spotify credentials
Step 4: Commit changes and reboot.
4.4 Squeezlite
Step 1. Select USB via Audio output
Step 2. Volume control
- None= Volume will be controlled only by your DAC and not the app or control software
- Software = This enables you to control the volume Airplay
5. Updates and servicing
The LINK will upgrade and update itself automatically.
There are no user-serviceable parts in the LINK. Updates of the installed software can be
downloaded via the SYSTEM menu in the settings.
There is a Boot button on the rear panel (9) which allows experienced users to load different
operating systems onto the internal computer. To activate, press the Boot button for 5 seconds
(requires a needle or similar fine point to access through the hole) until the red LED (4) on the front
panel starts blinking. The LINK can now be used as a storage device and a new operating system can
be installed. To exit the boot mode, press the USB Detox switch (5) on the front panel. CAUTION:
This will overwrite the installed software. Stack Audio does not take any responsibility for damage or
11