Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Co2meter TecWeld
- Page 1 TecWeld 0-2000ppm O2 Analyzer User Manual Version 8...
-
Page 2: Table Of Contents
Contents Quick Start Guide ........................... 2 Introduction ............................. 3 Package Contents ..........................3 Layout & Controls ............................. 4 Operation ..............................5 Before You Begin ..........................5 Turning the TecPen On ........................5 Selecting a New Configuration (optional) ..................5 Taking a Measurement ........................5 Saving a Measurement ........................ -
Page 3: Quick Start Guide
Quick Start Guide To perform a measurement: 1. Acclimatize the device to the surrounding temperature (1-2 hours). 2. Press ON/OFF to switch on the TecPen. 3. The PWR LED will light up green. 4. The TecPen will indicate the battery status and oxygen level with ****%. 5. -
Page 4: Introduction
USB Stick Particulate Filters (2) USB Cable Gas Lance Gas Lance Adapter Hose Adapter Calibration Certificate The rating plate must not be removed or modified without the consent of CO2Meter, IMPORTANT! Inc. - Ensure that the rating plate remains legible. -
Page 5: Layout & Controls
Layout & Controls START Button – press to start and stop measurements OLED Display PWR (Power) LED – Lights when the TecPen is turned on BT LED – Lights when charging if turned on SAVE Memory Button – Press to save measurement On/Off Button –... -
Page 6: Operation
Operation Before You Begin The TecPen can be charged with any 5V USB cable and adapter. Full charging takes place in under 2 hours. If the device is taken to a room with a significantly different ambient temperature, an acclimatization period of 1-2 hours is required. Always use a filter to protect the sensor from particles inside the measuring area. -
Page 7: Menu Display
Menu Display Press and hold the memory SAVE button to bring up the menu display. It is not possible to switch between the screens in reverse order. Screen 1: battery level main measured value screen Temporary Memory/Log Indicator Indicator for current measurement Screen 2: Consecutive / internal... -
Page 8: Menu Options
Menu Options In addition to the main screen the TecPen has 6 menu option screens that can be accessed by pressing and holding the memory SAVE button. Change Data File Format (Recipes) 1. Hold the SAVE button for 2 seconds to access the menu. 2. -
Page 9: Saving Data
Saving Data Default Operation After each measurement is completed and the pump stops running, the currently displayed measured value can be stored in the internal memory of the TecPen by briefly pressing the SAVE button. By default, a new data file is created each day using the date as the file name and the measured oxygen level and a time stamp as data. -
Page 10: Customizing The Data File Format
Customizing the Data File Format The Product_Number, Product_Name and Product_EAN fields can be customized so that multiple TecPens can be used and all will have different names in the data files. All data files can be further customized by selecting different “recipes” from the menu. To get started, you must have a file named exactly Rezepte.csv loaded on the TechPen’s internal memory card. -
Page 11: Maintenance
If error codes 1, 2, 4 or 5 appear, switch off the device, wait a few moments and then switch it back on. If the same error message appears after switching it back on, contact the manufacturer immediately If the TecPen displays error code 3 during operation turn off the device and contact CO2Meter immediately. -
Page 12: Troubleshooting Guide
Did you disconnect your device properly from the Computer the last time? Yes: The battery might be discharged. No/ I don’t know: Please contact CO2Meter. The TecPen is connected to the power supply but The BT light does not light up during charging if the BT light does not light up. -
Page 13: Specifications
Specifications TecPen Weld O2 Measurement range 0‐2,000ppm Range Accuracy 0‐500 ppm ±2% Mev** 500‐1000 ppm ±3% Mv* 1000‐2000ppm ±4% Mv* Resolution 1 ppm Response time at 25°C/ 77°F <15s Pump flow max. 400mL/min ‐10°C/ +60°C Temp. range Min./Max 14°F/140°F Medium Gas Power supply 5V USB and LiPo battery Rechargeable battery lifetime > 3 hours per charge Data Interface USB 10‐30°C Temperature compensation 50‐86°F Display OLED Display Cleaning housing No organic solvents. 40% EtOH Parts touching sample St.1.4404 / PTFE / glass Case aluminium anodized ... -
Page 14: Support
Warranty The TecPen comes with a (1) one year warranty starting from the date it was shipped. For more information visit our website: https://www.co2meter.com/pages/terms-conditions Contact Us We are here to help! For information or technical support, please contact us. Sales@CO2Meter.com (877) 678 - 4259 www.CO2Meter.com...
Need help?
Do you have a question about the TecWeld and is the answer not in the manual?
Questions and answers