1. Manuals
  2. Brands
  3. ALCON Manuals
  4. Network Hardware
  5. Premium Series
  6. User manual

ALCON Premium Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Video Recorder
User's Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Premium Series and is the answer not in the manual?

Questions and answers

Summary of Contents for ALCON Premium Series

  • Page 1 Network Video Recorder User’s Manual...
  • Page 2 Responsibility Statement: This Manual may include some inaccurate or not practical points due to product  continuous upgrade , we will modify this manual in time and inform the users This Manual is just for reference, we can’t make sure all info is totally same with ...

  • Page 3: Table Of Contents

    Content 1. Product Main Functions .................... 5 Basic Functions: ......................5 2．Operation Instruction....................9 2.1 Front Panel ......................9 2.2 Rear Panel ......................12 2.3 Mouse Operation Instruction: ..............11 3．Installation and Connection ................... 12 3.1 Warning ........................ 12 3.2 HDD installation ....................17 4．Configuration and Operation ..................
  • Page 4 4.13 Log Management ..................110 4.14 Information ..................... 111 4.15 Other Setting ....................113 4.16 User Management ..................116 4.17 VCA ........................119 4.18 Mobile Monitoring ..................122 5．WEB Browser......................123 5.1 Introduction ...................... 123 5.2 Login ........................123 5.3 Preview ....................... 124 5.4 Playback ......................

  • Page 5: Product Main Functions

    1. Product Main Functions Basic Functions: Support IP camera, high speed dome IP camera, Internet video server, and  third-party IP products. Support Onvif standard protocol.  Each channel supports dual –stream compression.  Each channel’s encoder parameter is adjustable, including resolution, frame ...
  • Page 6 Set pre-recording and post-recording linked by alarms  Query records according to timing/events.  Support local redundancy recording.  Support encrypted recording files.  Support 4 recording period each day, each period can be set as different  recording template. Support special recording template in holiday.
  • Page 7 upload into control center, send emails, alarm output, video recording by any channel . Unusual situation detection includes no disk, full disk, error in disk reading and  writing, illegal access, IP address conflict, MAC address conflict, no available redundant disk, offline, hot spare error. All these info can link, screen alert info, sound alert, upload into to management center.
  • Page 8 Original code for some software function.  Development support and training on user system . ...

  • Page 9: 2．Operation Instruction

    2．Operation Instruction 2.1 Front Panel The following picture is PSE series NVR front panel. Function list: Type Name Explanation Status Power light will light up after the device power on light HDD light will light up when reading and writing disk Internet Internet light will light up after the device is...
  • Page 10 Standard series NVR(8 HDD) front panel: Standard series NVR(8 HDD) front panel lights: Type Name Explanation Status Power light It lights up after the nvr is powered on lights Status light It lights up under remote controller Alarm light It lights up after system alarms HDD lights HDD light will light up when reading and writing disk...

  • Page 11: Mouse Operation Instruction

    Button Function buttons For PTZ, these buttons can call preset .zoom ; control iris, focal length ,lights and wiper. Other function : manually record, playback records , swift between main and sub output port , clear off alarms ,call main menu.

  • Page 12: Rear Panel

    interface. Slid to choose options  Slid up Slid to show upper page  Slid to choose options  Slid down Roller Slid to show lower page  Press and drag Swift mouse between main and vice screen. 3．Installation and Connection Before using, first please install HDD, then install NVR and other parts 2.2 Rear Panel PSE series NVR(4ch 1 HDD)rear panel is like the following picture :...
  • Page 13 PSE series NVR (4ch 2HDD) rear panel is like the following picture: PSE series NVR (8ch 2HDD/16ch 2HDD ) rear panel is like the following picture : PSE series NVR (16ch 4HDD )rear panel is like the following picture :...
  • Page 14 Standard series NVR (4ch 1HDD )rear panel is like the following picture : Standard series NVR (4ch 2HDD/8ch 2HDD )rear panel is like the following picture :...
  • Page 15 Standard series NVR (16ch 2HDD/16ch 4HDD )rear panel is like the following picture : Standard series NVR (16ch 8HDD/32ch 8HDD )rear panel is like the following picture :...
  • Page 16 3.1 Warning Warning: Change battery or adapter may cause explosion. If necessary, please replace it by same type. Installation precaution: Don’t put liquid container on NVR  NVR should be installed in good ventilation condition, distance between  different NVR should be more 2CM. Working temperature (-10℃～+55℃), humidity (10%～90%) ...

  • Page 17: Hdd Installation

    3.2 HDD installation NVR not include HDD. The disassembly of NVR case and HDD installation must be done by professional person. Precaution: Please use monitoring-level HDD used specially for NVR.  Make sure the device is powered off before installation ...
  • Page 18 Precaution: The upper file just for reference, file size may be a bit different with reality. Any damage made by this will not be taken by manufacturer. 3.2.2 HDD installation steps: Tool : Philip's head screw Instruction pictures(1): 1. Loose the screws on the upper cover and remove the cover from the NVR. 2.
  • Page 19 3.Connect the power cable of HDD to the power connector of the NVR. 4. Fix the HDD with screws onto the bottom of the NVR. And then close the upper cover of the NVR, and fasten all the screws loosened in step 1. Instruction pictures(2): 1.
  • Page 20 2. Connect the data bus of HDD to the SATA data bus connector of the NVR. 3. Connect the power cable of HDD to the power connector of the NVR.

  • Page 21: 4．Configuration And Operation

    4．Configuration and Operation 4.1 Start Up/Log Out 4.1.1 Start Up Precaution: Before starting up the device, please make sure the power input and ground protection is well done. Before starting up the device, please make sure NVR output interface and monitor is well connected.

  • Page 22: Guide Setup

    Precaution: Don’t power off when the system shows “sign out current user”  Don’t power off compulsorily when the device is running.  4.2 Guide setup Customer can do fast setting on the device by “guide setup” 1. First, set the current language, output resolution, and auto detection of device. 2.
  • Page 23 Note Choose “Yes” to continue running “Guide setup”; choose “No” to jump “Guide setup”, choose ”Never” to jump “Guide setup” automatically when starting up the system next time. 3.Choose “Yes”, it will show the following interface: ID: admin  Password: admin ...
  • Page 24 5.Click“Next”to enter “Network Setup” interface. 6.Click“next” to formatting Disk.
  • Page 25 Note You must initialize the hard disk before recording. 7.Click “next” to search and add devices. 8.After configuration guide is finished , it will show the following interface...

  • Page 26: Channel Management

    9.If there is still uninitialized disk , it will show the following interface. Click “Do”, then the system will automatically formatting the uninitialized disks 4.3 channel management 4.3.1 Add device. If there is no camera to be added in this channel, it will show the following mark , click “+ “...
  • Page 27 1. Click “+” to see following. Note Mouse click is not available in searching process.  The system will automatically add the devices with default port, ID and  password. If the info doesn’t match the default, customer can choose “Manual Add”.
  • Page 28 4.After input Device IP address, Port NO., User name and password, then it will add devices successfully. Note For PSE-NVR POE port, the system will add devices automatically, for  PSE-NVR standard port, it support manual add.
  • Page 29 4.3.2 Add devices in usual way 1.Choose“main menu->channel management->basic configuration” to enter channel management interface as the following picture. Note For difference devices, this interface is different.  Adding successfully, you can see the device in the “added devices” list. ...
  • Page 30 Click “Advance Search”, customer can search devices according to different connect mode. 3. In the search result interface, choose the IP address, then click “Add” to add device into NVR channel , or double click IP address to add. It supports bulk adding. Note For PSE-NVR digital channels, if it showed “Plug and Play”...
  • Page 31 1. Go to channel configuration -> basic configuration, click “manual add” to enter digital channel interface.
  • Page 32 2. Choose the channel number to add the camera, check “enable” button, choose connection mode according to camera type. When you select RTSP in device type, you will going to interface as follow. 3. When you select ONVIF in device type, you will going to interface as follow.
  • Page 33 4. Input device IP address or URL address, User name and password, click “confirm” to finish adding. Adding other devices in the same way. Note If you want to add several channels together, please choose the channels in  “device channels” interface If you choose adding devices with IP address increasing, then after the IP ...
  • Page 34 There are three options for ”plug and play”  Disable: Cannot add device in ”plug and play”, users can add cameras  manually. Add automatic: NVR will automatically search and add devices.  Automatic found: When you get back to preview interface, the system ...
  • Page 35 Note This interface shows added cameras’ channel number, property, version  and connect status. 2.parameter import/export 1) Choose the camera for import/export in added list. 2) Click “import”. 3) Choose target configuration backup file to import. Note After the parameter is imported successfully ,the camera will reboot ...
  • Page 36 4) Click “export” to go to following page. 5) Choose saving path for exporting files. When it shows the following image, it export successfully. Upgrade by remote access, reboot IPC 1) Choose the camera for import/export in added list.
  • Page 37 2) Click “upgrade”. 3) Click “browser files” to choose upgrade file 4) Click “reboot IPC “to restart cameras. 4.3.6 POE Power Info. Only PSE NVR has this function 1. Go to “main menu->channel management ->channels->POE power information”.
  • Page 38 Note “ ” means POE supply is working well.  “ ” means no camera connected or no power  “ ” means real-time power info.  4.3.7 Stream setup 1.Select main menu-cameras-stream setup Video/audio parameter 1.Select channel Channel No.: video compression type: live(current status cannot be ...
  • Page 39 Enable corridor mode: change 16:9 into 9:16.  Frame Rate: Video frames per second  Bit rate type: CBR(Constant Bit Rate) and VBR(Variable Bit Rate) for  option. CBR is to fix bit rate, and VBR will fluctuate according to if there are many moving objects or not.
  • Page 40 2. Select region setup and enable this function, hold the left mouse button drag on the screen to set the key area. It support up to 4 ROI. 3. Click apply and save the setup. 4.3.8 Video Setup 1. Select main menu -> -cameras -> video setup...
  • Page 41 2. Select channel 3. Setup format, video flip and mode. Note Equipment support four period and a temporary value, different time  parameters can be independent configuration, time period shall not overlap, if start time and end time are same the setting will be disabled. The current time is out of the period, according to the provisional value to set the video input parameters There are 5 modes including standard, indoor, weak light, outdoor and...
  • Page 42 1.Select channel 2.Setup OSD for this channel If want to change OSD position, drag OSD into target location directly. Note OSD setup include name, date, week, 12 hours system, date format,  time format, OSE color and background color.
  • Page 43 Privacy 1. Select channel. 2. Drag mouse and set privacy area. 4.3.10 Motion 1. Select main menu -> cameras -> motion...
  • Page 44 2.Select channel 3. Setup motion schedule time, region and sensitivity. 1) Click enable. 2) Click schedule to schedule time. 3) Drag mouse to select region of motion detection. 4) Edit the sensitivity. The bigger the value is, the more sensitive the motion detection alarm is.
  • Page 45 4. Click schedule to schedule time. 5. Select activate, when the alarm occurs, it can trigger voice prompt, screen display, record, alarm output, capture and single picture. 6. Parameter can be copy to other channels and clicks apply to save setup. 4.3.12 Alarm Input Alarm input means there are external alarm devices to be connected with, such as switch alarm, smoke alarm, laser alarm, temperature alarm, and etc.
  • Page 46 6. Click apply to save parameter. 4.3.13 Video Loss 1. Select main menu -> cameras -> video loss 2. Select channel. 3. Select enable and click schedule then setup alarm input schedule time. 4. Select activate to link other actions. 1) It can trigger voice prompt, screen display, record, alarm output, capture and single picture.
  • Page 47 4.3.14 PTZ Setup 1. Select main menu -> cameras -> PTZ Setup 2. Select channel. 3. Select PTZ control protocol, address and port. 4. Click apply to save parameter. Note Users can customize a serial port attributes, set the baud rate of serial port, data bits, stop bits, parity and then copy to other channel.

  • Page 48: Preview

    2. Select channel. 3. Click enable preview trimming, and then copy to other channels. 4. Click apply to save parameter. 4.4 Preview 4.4.1 Preview Icon Description Alarm(motion detection alarm, video privacy alarm, port alarm, video loss alarm and IVS alarm) Record( timing, manual) This channel is in recording as well as in alarming at the same time.
  • Page 49 4.4.2 Right-click Menu In preview, it can do switch preview screen, preview setup, cameras, playback and enable record. MENU Description: Name Description Main menu Go to main menu Preview settings Go to preview settings screen Single screen Select channel and go to single screen Multi-screen Go to 1/4/8/9/16/25/32 screen Prev page...
  • Page 50 Start switch According to the rule of preview settings the screen constantly switch the next channel in the preview list. And it will switch circle continuously. Mobile monitoring Download mobile monitoring software and scan QR-code device ID Channels Go to channel management page Playback Go to playback page Clear alarm...
  • Page 51 Next page Switch next page Start switch According to the preview Settings constantly switching the next screen, it will switch to final screen again from the first screen Main port Switch to main port from supplementary port Set to main port Set the supplementary port to main port Note Only NVR (16-ch 8HDD, 32-ch 8 HDD) support 25 or 32 screen.
  • Page 52 4.4.3 Super menu description Mouse sliding into a display on the right side, a super task bar which can be enter the main menu by one key, including video playback, recording settings, preview settings, PTZ control are fixed for the first four, the remaining ICONS will display the most frequently using functions.
  • Page 53 2.The shortcut bar support PTZ control, instant playback, manual capture, manual record, E-zoom, intercom and edit channel information. Button Description PTZ control: up, down, left, right and cruise Instant playback manual capture start/stop manual record E-zoom start/stop intercom check/edit channel information Instant playback It will playback the latest recording video in 5 minute.
  • Page 54 2. Move your mouse to where you want to see in red square area in the mini viewer at right bottom of screen. 3. Scroll up and down of your mouse to zoom in or zoom out. Note NVR (4-ch 1HDD, 4-ch 2HDD, 8-ch 2HDD) can zoom in by 8 times, other models ...
  • Page 55 Note No matter main stream or sub-stream the system display in preview, it won’t  affect the stream of recording video, NVR always record the main stream. 3. Output: VGA/HDM1, HDMI2/BNC, VC 4. Cruise intervals: set the interval time between switch channels, such as no cruise, 2s, 3s, 5s, 10s, 15s, 30s and 60s.
  • Page 56 2, 6, 10, 14 are to the second, Channel 3, 7, 11, 15 are to the third, Channel 4, 8, 12, 16 are to the fourth one. Note Only NVR (16-ch 8HDD, 32-ch 8HDD) have HDMI2/BNC.VGA/HDMI1  Only the last one channel can be set to synthesis of virtual channel, suggested ...
  • Page 57 Note The user can choose “Don’t remind me” to not display prompt information, or click "next" to see the message. 4.4.7 Audio preview and intercom Audio preview Select one video with mouse or remote control, system will play audio automatically. Intercom Users can use intercom interface to realize intercom between remote control and equipment.

  • Page 58: Ptz Control

    4.5 PTZ control 4.5.1 PTZ parameter setting Note: Please confirm the network to be connected between the PTZ decoder and the  NVR and have the PTZ decoder parameters configuration in device. IPC serial port settings see 4.3.14 section.  NVR local serial port settings see system setup instructions.
  • Page 59 2. Choose channel. 3. PTZ control description 1). PTZ Control Use mouse to click to control PTZ going up, down, left and right. Use mouse to click to control PTZ going inclined direction. Click start or stop PTZ auto horizontal action. 2).
  • Page 60 2) Preset setting Control the PTZ to a particular location, and select the preset number in preset drop-down list, or directly enter the preset number, click "Settings" to complete preset position setting of this number. 2. Recording and demonstration track 1) Click "began track", the icon's message becomes "end track”, the system will record the PTZ running track process.
  • Page 61 Select cruiser number in “Cruise No.” drop-down list. When select a certain cruise no. the system will automatically display the preset position and the preset position dwell time and call speed. 2) Editing the cruising path First, select a cruise no. and enable it. Second, click "Add"...

  • Page 62: Record

    Call preset: under the PTZ control mode, press【backspace】and 【number】  and then 【OK】, the system will take action of call preset accordingly. Speed setting: under the PTZ control mode, press number keys 【1】～【4】to  set speed of PTZ action. Control PTZ light, wiper and auxiliary switch: when in the PTZ control mode, ...
  • Page 63 3) Check [All Day] to recording 24hour all day for all channels. Check [Customize] to set up to 4 time period in a day at different templates. 3) Select resolution, frame rate, bit rate and type for different templates. 4) Click [Finish] to save the configuration. 2.
  • Page 64 1) Choose [Main Menu]->[Quick Guide]->[Motion],enter the window as below. 2) Set motion detection in all day or customized time period. And you can set sensitivity of detection. Also you can set if the system stop recording or start schedule recording in un-armed time. 3) Set resolution and encoding parameters for all channels.
  • Page 65 2) Select open circuit or close circuit. Check [All Day] to recording 24hour all day for all channels. Check [Customize] to set up to 4 time period in a day at different templates. Also you can set if the system stop recording or start schedule recording in un-armed time.
  • Page 66 1) Choose [Main Menu]->[Quick Guide]->[VCA ],enter [Smart Analytics Setup] as below. 2) Channel number: Select to enable camera VCA or NVR VCA. (Only NVR with 8HDD support 2 channels of NVR VCA) Rule number: Select rule number and check to enable it. Rule name: Enter rule name.
  • Page 67 3) Check [All Day] to recording 24hour all day for all channels. Check [Customize] to set up to 4 time period in a day at different templates. Also you can set if the system stop recording or start schedule recording in un-armed time.
  • Page 68 2. Choose a channel. 3. Choose whether to enable record “audio”, “redundant” or “I-frame”. Note If you need redundant recording, you have to configure redundant disk in [Disk management]. If you need I-frame recording, you have to set I-frame specification of camera in web client.
  • Page 69 7. Dwell (days) setup to set how many days the recording video will save. “0” means no time limitation, the max video retention time is 60(days). 8. Click 【Apply】 save the configurations. Advance Setup 1. Choose [Main Menu]->[Recording Setup]>[Recoding]->[Advanced], enter the window as below.
  • Page 70 Holiday Plan Configure the holiday plan of the current year .Once enable ,it will carry out the plan preferential during the holiday. 1. Choose [Main Menu]->[Recording Setup]>[Recoding]->[Holiday Plan ], enter the window as below. 2. Click one of the Holiday plans and press【Edit】or double click the article in recording setup list.
  • Page 71 Note Sunday is seen as the first day of a week.  4.6.3 Recording Parameter 1. Choose [Main Menu]->[Recording Setup]>[Parameter], enter the setting page as below. 2. You can choose which method you use when the disk is full, such as [Overwrite File][Delete Non-Alarm Record][Stop Recording].
  • Page 72 2. Check and Uncheck channels to start or stop the manual record. 3. Click [Start all], then start all channels manual record. 4. Click [Stop all], then stop all channels manual record. Note: Icon Status descriptions no video and no recording Video available but no recording no video in manual recording video available in manual recording...
  • Page 73 video available in alarm recording no video in customized recording video available in customized recording Note The manual recording can only be stopped manually, otherwise the video  will always going on until restart the device. If enable the recoding template for some channels , it will go on the template setting after stopping the manual recording 4.6.5 Snapshot Setup...
  • Page 74 4） Choose whether to upload the snapshot to FTP. Click on the "FTP Settings" button to enter the setting interface, specific FTP setting method can be found in the corresponding sections. 5） Choose whether to upload the snapshot to SMTP. Click on the "SMTP Setup" button to enter the setting interface, specific SMTP setting method can be found in the corresponding sections.

  • Page 75: Playback

    Click [Continuous], start the cooperation of “rebuild index”. Users can exit this page for other operation under the process of “rebuild index.” 4.7 Playback 4.7.1 Instant Playback In [Preview] interface, when you hold your mouse pointer at the bottom of selected screen, it will appear a shortcut bar.
  • Page 76 Shortcut bar 4.7.2 Playback Descriptions Right click [Menu]-> [Playback]...
  • Page 77 Playback control bar description 4.7.3 Normal Playback 1. Choose [Main Menu]->[Playback],enter the page “Normal playback” page as below. 2. When you select a channel, the calendar will automatically show available videos in the current month. 3. Single click the date in calendar.
  • Page 78 4. System automatically plays the video clips. 5. Other playback operation Click” ”, enter full screen playback. Click , realize the video “fast forward “or “ Slow forward” Note Max support 16ch synchronous playback, Different models and recording  have different playback performance. 4.7.4 Event Playback By event type (port alarm, motion detection, video lost, video mask, VCA) query the video in a certain period .And play the qualified video from the generated query list.
  • Page 79 5. System automatically plays the video clips. Note Event playback, the player will skip no-alarm video time period  4.7.5 Tag Playback Tag record helps users take Note of relevant information during video playback at some point. Then users can position the right video clip by tag when searching. Add /manage Tags 1.
  • Page 80 Tags playback operation 1. Enter “Playback” interface, choose “Tag”, go to the “Tag Playback” as below. 2. Choose channels. 3. Input keywords of Tag. If input nothing, it will default searching the scheduled date video from selected channels. 4. Select date. 5.
  • Page 81 Note Recording play from “Pre-Playback” to “ Pose-Playback”. And it turn to the  next tag recording when plays end “Pre-playback” and ”Pose-playback” can be edited.  4.7.6 Smart Playback When you set IVA functions on the camera, including “tripwire” or “perimeter”, the NVR can find all the video in which IVA alarm is triggered intelligently.
  • Page 82 2. Select “channel” and “date” ,start to play. 3. Click on the left bottom icon , enter the smart playback interface of line drawing...
  • Page 83 4. Drawing a line or an area in the video. 5. Click start to search. During the search process, at the left top corner it displays the words "VCA SEARCHING ", at the same time, the progress bar will display the search progress and results in RED. 6.
  • Page 84 NOTE Intelligent playback process video only within the scope of time shaft. 4.7.7 Picture viewer Browse the pictures saved in the hard disk. See picture as below. Description User may set interval time to play the pictures automatically.  Also user may pause auto-play and click left or right side of the picture ...
  • Page 85 1. Enter playback interface, and select “External file”. 2. Select ”Refresh” to read files from external storage medium. 3. Click the target file to play. Description Ensure USB flash disk, mobile HDD or USB CD-ROM are well connected with NVR. 4.7.9 Play by log information Play the files according to log information.
  • Page 86 1. Select [Main menu] -> [System Setting] -> [Log Management] 2. Select “ Channel ” and set “ Type ” and “ Start time ” and click “ Query ” 3. Double click file in log list, and enter “Play” interface. Description Move the time bar to control playback progress.
  • Page 87 The recording files in the channel and time which you check must be  available before you can play. 4.7.10 Playback assist function. Single frame playback You can find slight changing of image by single frame playback. Enter [Playback] interface, and click to adjust into “...
  • Page 88 Snapshot Capture the pictures when playback. Please follow the steps as below. 1. Enter playback interface. 2. Click at the control bar to caputre picture of which channel you sellect. Description If you need save pictures which you snapshot in USB flash disk, please ...

  • Page 89: Backup

    2. Staying the mouse on the progress bar where recording is available for 1 second, it will appear thumbnail view. Description When it is beyond the decoding capacity, thumbnail view cannot be  displayed. When there is no recording files where your mouse stays, thumbnail view ...
  • Page 90 2. [Search] 3. After input search condition, click “Search”. Click ”Search Toady”, only search today’s recording. Click “Recording Clip”...
  • Page 91 Note Image file can’t support “Recording Clip” function.  4. [Main menu]->[Backup] Click “ ” or double click recording file to play it. Click “ ”, lock or unlock the recording file. 5. Choose recording file, then click “Backup” button:...

  • Page 92: Network Setup

    6. Choose “Target”, file format, video backup player, then “Apply”. 4.8.2 Quick backup 1. [Main menu]->[Backup]->[Quick backup] 4.9 Network setup 4.9.1 NIC 1 1. [Main menu]->[System setting]->[Network setup]->[NIC 1] 2.Choose “Auto Get IP Address” or “Manual Setup IP Address”.
  • Page 93 If choose “Auto Get IP Address”, NVR will get IP address from DHCO after reboot. 3.If choose “Manual Setup IP Address”, please set IP address, Subnet Mask, Gateway etc. 4. [Apply], then NVR will reboot automatically. 4.9.2 NIC 2 1. [Main menu]->[System setting]->[Network setup]->[NIC 2] 2.
  • Page 94 Only POE NVR support it.  1. [Main menu]->[System setting]->[Network setup]->[POE LAN Card]. 2. Plug and Play IP camera’s IP address will be changed automatically when we change this POE NVR’s IP address. 4.9.4 PPPOE 1.“Main menu”->“System setting”->“Network setup”->“PPPOE”...
  • Page 95 2.Set “Boot Auto-Dial”. 3.Input User Name and Password. 4.Connect. 5.Click “Apply” to save setting information. 4.9.5 IP permission 1.“Main menu”->“System Setting”->“Network Setup”->“IP permission”...
  • Page 96 2. “Disable IP Permission Setting”. “Accept listed IP” or “Refuse listed IP” 3. Input IP address 4. Add 5. Apply 4.9.6 Register Center 1.“Main menu”->“System Setting”->“Network Setup”->“Register Center” 2. Input main server and standby server’s IP address and port number. The default port number is 6004.
  • Page 97 2. Click “Enable DDNS” 3. Input Domain name. 4. Input DDNS server’s domain name or IP address. 5. Input DDNS server’s port number, user name and password. 4.9.8 FTP Setting 1. [Main menu]->[System setup]->[Network Setup]->[FTP]...
  • Page 98 2.Input FTP Server’s address, port number, user name and password. 3.Apply 4.9.9 SMTP 1.“Main menu”->“System Setting”->“Network setup”->“SMTP” 2.Input SMTP server address, port number, user name, password, log mode, receiver address and subject. 3.Apply 4.9.10 Others “Main menu”->“System Setting”->“Network setup”->“Others”.
  • Page 99 Network Detect 1.“System Setting”->“Network Setup”->“Other Setting”->“Network Detect”: 2.Input IP camera’s address in “Network testing”, then click “Test” to test network environment. 3.Click “Status Detect” to test “Network gateway”, DNS. Network Resources Statistics “System Setting”->“Network setup”->“Other Setting”-> “Network Detect”->“Network Resources Statistics”:...

  • Page 100: Disk Management

    4.10 Disk Management “Main menu”->“System Setting”->“Disk management” 4.10.1 Basic Configuration HDD Detect.
  • Page 101 Disk Setup Select which function you use for the disk. Note You have to set the disk as redundant use before start redundancy recording. 4.10.2 Advanced Setup 1.“Disk Management”--“Advanced setup”...
  • Page 102 2. Mode selection Disk Group: you can define which disk record which channel or define which channel recorded into the targeted disk. Quota: Set the max disk space for every channel, different channel can be set different disk space. 3. Disk Group 1)Choose group number (01-08) 2)Select disk number.
  • Page 103 2)Choose channel number. 3)Set disk space of recording file, unit is GB, 0 means unlimited. 4)Set disk space of pictures, unit is GB, 0 means unlimited. 5)”Apply” for save. 4.10.3 Display Setup Setup device display parameters. 1.Main menu – system setting – display setup...
  • Page 104 2.Display setup parameters instruction: BNC:BNC output mode, P/N optional, only NVR with 8HDD support this  function. HDMI/VGA output: setup output device resolution  Auto detection: auto adjust monitor best resolution  Output mode: setup VGA output image mode, four modes optional. ...
  • Page 105 4.10.4 Display Setup Setup device display parameters. 1. [Main menu] –> [System setting] – [Display setup] 2. Display setup parameters instruction: BNC: BNC output mode, P/N optional, only NVR with 8HDD support this  function. HDMI/VGA output: setup output device resolution ...
  • Page 106 Hide indicator: choose to show the record indicator and alarm indicator in  preview interface. Decoding reach limit: choose there is tip information when device decode  ability reach max limit. Mouse cursor speed: setup mouse speed, support 0-100 optional ...

  • Page 107: Time Setup

    4.10.6 S.M.A.R.T 1. Disk Management-->S.M.A.R.T Setup 2. Select one hard disk 3. Enable【Start S.M.A.R.T Detection】, the information will be displayed in the list 4.11 Time Setup Setup system time, timing and NTP.

  • Page 108: Configuration

    Modify system time zone and time, click “apply” to save the settings. NTP setup: input NTP server address, port and interval time 4.12 Configuration 4.12.1 Reset to Default 【Continue】to reset all parameter to factory default Note The NVR will auto restart after resetting to default. 4.12.2 Configuration Export 【Export to】select export save path 【File name】name the export file...
  • Page 109 4.12.3 Configuration Import 【Refresh】to check the import file list 【Import】to import the configuration Note The NVR will auto restart after importing.

  • Page 110: Log Management

    4.13 Log Management 1. Search the log via 【Channel】,【Type】and【Start Time】 First page Previous page Last page Next page Enter page No. and turn to that page...

  • Page 111: Information

    3. Log export Select 【Export Current】 or 【Select All】 to export the logs, then select backup path 4.14 Information 4.14.1 System Upgrade Upgrade from local: select local firmware files...
  • Page 112 Upgrade from FTP: enter server IP, Username and Password Note The NVR will auto restart after upgrading.  If upgrade failed or can’t work after restart, please contact supplier soon.  The NVR is dual system, the kernel files may need upgrade twice, please select ...

  • Page 113: Other Setting

    4.14.3 Exception There are ten exception situation, such as 【Disk Full】 , 【No Disk】 , 【Disk R/W error】 , etc., and you can select to active 【OSD】 , 【Voice Reminding】 and 【Upload Center】 when it happens. 4.15 Other Setting Setup serial port, video encryption, protocol management, alias management and type management.
  • Page 114 4.15.1 Serial port Setup device serial port, bit rate, date bit, stop bit, check and operation mode. Video encryption Setup video encryption password 4.15.2 Protocol management Setup and add device protocol...
  • Page 115 4.15.3 Alias management Setup channel’s alias...

  • Page 116: User Management

    4.15.4 Type management Setup record type name. 4.16 User Management 4.16.1 Add User Main Menu-->User Management-->Basic Configuration...
  • Page 117 【Add User】: Select 【Group】-->Enter 【Account】 and 【Password】 Note Add up to 31 users  There are four groups, “Normal User”, “Special User”, “Super User” and  “Administrator”, and the authorization are different as well: Normal User: Preview Special User: Preview + Control Super User: Preview + Control + Setup Administrator: Preview + Control + Setup + User Management...
  • Page 118 4.16.2 User Authority Management 1. Select in the user list to edit user authority 2. Authority Instruction: 1) Local: clear alarm, shutdown/restart, log search, alarm setup, channel management, parameter setup, system setup and user management 2) Remote: Manual dis-alarm, shutdown/restart, log search, alarm setup, channel management, parameter setup, system setup and user management 3) Channel: remote preview, local playback/ capture preview, remote playback/...

  • Page 119: Vca

    4.17 1.Main menu – VCA – event parameter. 2.Choose the channel need to be setup. 3.Enable VCA, user can choose enable local VCA or IPC VCA. Instructions Only standard NVR series (16 channel with 8HDD, 32 channel with 8HDD)  and POE NVR (16 channel with 4HDD) support 2 channel local VCA.
  • Page 120 No-alarm color: setup border color without alarm.  Alarm color: setup border color with alarm.  Display rule: display rule information on screen.  Display alarm counts: display alarm accounts on screen.  5.Draw on screen: enable it and draw rule area on small screen, click “clear line” to clear rules on screen.
  • Page 121 1)choose rule number need to be setup 2)choose “enable VCA” and click schedule to setup. 3)Activation: setup VCA alarm trigger action, include voice, OSD, recording, alarm output, snapshot and single screen etc. 4)after done the setting, can copy to all channels. 9.click apply to save settings.

  • Page 122: Mobile Monitoring

    4.18 Mobile Monitoring User can download client app via scan QR-code, input ID to use mobile monitoring. 1. Right-click menu –> mobile monitoring 4. Scan QR-code for Android APP and IOS APP. 5. When the NVR can access to internet, QR-code of ID will appear automatically. 6.

  • Page 123: 5．Web Browser

    5．WEB Browser 5.1 Introduction User can input device IP address in web browser to remote view device. Support IE/Firefox/Chrome. 5.2 Login User can login device IE interface through multiple computers at same time. 1. Open Web browser, input NVR’s IP address: 2.choose language 3.input user name, password, and click login into preview interface.

  • Page 124: Preview

    5.3 Preview After login successfully enter preview page. Preview icon description Icon Description Single screen 4-split screen 9-split screen 16-split screen Fixed ratio Ratio self-adaption Connect all the channel...

  • Page 125: Playback

    Start remote recording Start recording Snapshot Talkback with front-side device Full screen Start full channels recording Volume 5.4 Playback Click “Playback” tab page to enter into web playback page. Playback icon description Icon Description Switch into playback by listed files portfolio...
  • Page 126 Play recording file Pause Stop Step-forward by frame Fast forward, x2 Slow forward, /2 Volume control Snapshot Cut recording file Single screen 4-split screen play Full screen Switch mode Visualized play bar...

  • Page 127: Log

    Draw yellow line to move time shaft Zoom in time shaft Zoom out time shaft Control icon description Icon Description Browse local recording files Elapsed time / Remaining time Progress bar First page Last page Next page End page Download Download management 5.5 Log Click “Log”...

  • Page 128: Configuration

    Enter query condition to search log information and back it up. Description Log file saving path: D:\NetVideoBrowser  5.5 Configuration Click “configuration” tab page to enter into configuration page. Description If you revise configuration of remote cameras, the local specifications will be ...

  • Page 129: Appendix 1 Hard Disk Capacity Calculation Method

    Appendix 1 Hard disk capacity calculation method According to recording conditions, such as recording type, saving time of recording files, you can figure out how much hard disk capacity a NVR need. Method: According to formula(1)we can get how much storage capacity needs for single channel per hour , unit MByte.

  • Page 130: Appendix 2 Trouble Shooting

    Appendix 2 Trouble shooting Trouble Possible reason Plugging in power and turning on 1) Power cable is broken. NVR, but “PWR” light on the panel is 2) Power supply is broken. off, and the fan in the chassis does not work. Plugging in power and turning on 1) Cable on the panel is broken.
  • Page 131 PTZ cannot be control by RS-485 of 1) RS-485 cable is not well connected. NVR. 2) PTZ decoder type is incorrect. 3) RS-485 interface on the main board is broken. 4) The location of connected serial port does not match what you set. (default is A2B2) 5) Configuration of serial port is not correct or does not match the...

  • Page 132: Appendix 3 Maintenance Instruction

    Appendix 3 Maintenance instruction 1. The dust on the PCB board would cause shot circuit after it is damped. To run the device well for a long time, we suggest to clean dust internal chassis regularly. 2. Please make sure all the devices are connected to the ground well in order to avoid disturbance of video or audio signal.

Table of Contents