Download Print this page

Lakeshore Watch-Me-Walk Safety Bar Manual

Watch-Me-Walk

The Watch-Me-Walk Safety Bar is the perfect tool to promote both self-

awareness and early walking. To assemble the Watch-Me-Walk Safety Bar,

simply follow the instructions and accompanying illustrations.

What's Included

• safety bar (assembled)

• four 3" wood screws

• four 3" machine screws

with butterfly wings (optional)

What You'll Need

• Phillips screwdriver

• pencil

• level

(800) 421-5354

Safety Bar

™

• two unbreakable mirrors

• six 1

⁄

" mirror screws

• six washers

• tape measure

• drill

• stud locator

LA659

Table of Contents

Need help?

Do you have a question about the Watch-Me-Walk Safety Bar and is the answer not in the manual?

Page 1 Watch-Me-Walk Safety Bar ™ The Watch-Me-Walk Safety Bar is the perfect tool to promote both self- awareness and early walking. To assemble the Watch-Me-Walk Safety Bar, simply follow the instructions and accompanying illustrations. What’s Included • safety bar (assembled) • two unbreakable mirrors •...
Page 2 Securing Bar to a Wall with Studs The first thing to do is find a location for your safety bar. Be sure that the bottom of the safety bar is at least 12" from the floor or moulding. Otherwise, the bottom mirror will not fit into place. (See cover illustration.) Using a stud locator, find the wall studs.
Page 3 Installing the Unbreakable Mirrors It does not matter which mirror you use as the top or bottom mirror. Both mirrors come with a protective plastic coating. Do not remove the plastic until directed. Place a mirror on top of the bar so the screw holes are at the top. Be sure the bottom of the mirror fits in the slot between the back of the safety bar and the wall.
Page 4 Although it is shatterproof, it can be scratched if improperly cleaned. Do not use paper towels or any other rough cloths on the mirror surface. safety bar Only use a cloth and warm water to clean the mirrors. mirror Lakeshore LEARNING MATERIALS...