KMART SLR-19044 Manual

SLR-19044
IMPORTANT SAFETY INSTRUCTIONS:
The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is
important to read all of these instructions carefully before using the product, and to save them for future reference or new
users.
1. This product must only be used as intended in accordance with the enclosed operating instructions.
2. Do not carry the appliance by the mains cable or pull the cable to remove the plug from the socket.
3. If the appliance stops unexpectedly or appears to malfunction, switch off the power supply, unplug from the mains and stop using
immediately. Seek professional advice to rectify the fault or make repairs.
4. Switch off the power supply or unplug from the mains socket when not in use, before cleaning or changing accessories.
5. Avoid positioning the appliance where the power cable might be accidentally trapped or damaged.
6. Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.
7. Ensure the appliance is switched OFF before connecting the mains power supply.
8. Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.
9. This product has not been designed for use by children.
10. Children should be closely supervised at all times when they are near any electrical appliance.
11. To protect against electric shock, never allow the appliance, the mains cable or plug to come into contact with water or any other
liquid.
12. Never reach for any appliance that has fallen into water. Switch off the power supply at the mains immediately and unplug. Do
not re-use until the product has been inspected and approved by a qualified electrician.
13. Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains supply
connections.
14. To disconnect, first ensure that all controls are in the OFF position, then remove the plug from the electricity supply.
15. Where relevant keep all ventilation slots, filters, etc. uncovered and clear of debris. Never drop or insert objects into the openings.
16. Do not use outdoors. This appliance has been designed for domestic indoor use only.
17. Do not use the Wax Warmer if the supply cord is damaged, it must be replaced by the manufacturer in order to avoid a hazard.
18. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
19. Children should be supervised to ensure that they do not play with the appliance.
20. The appliance is only to be used with the recommended vaporizing medium. The use of other substances may produce an unstable
result or fire risk.
Product specification
Rated voltage: 220-240V ~ 50Hz
Max. 28W
INSTRUCTIONS FOR ASSEMBLY
1. Place ceramic dish on top of the Wax Warmer.
2. Be sure the Switch on the back of the Wax Warmer is in the OFF position.
Place 1-2 Wax Melt pieces in the Wax Warmer dish. Never place more than
two Melts in the Wax Warmer dish at one time.
3. Insert the plug from the power cord into the socket. When
switched "ON", the internal light will also turn on.
4. Fragrance is released as the Melts begin to liquify.
5. Once the Wax Melts have liquified do not add additional Melts
to the dish. First remove hardened wax and then add fresh Melts
to the dish.
ELECTRIC WAX WARMER
Wax melt
42872009
OFF
ON