Related Manuals for Racketclub Powershot 2
Summary of Contents for Racketclub Powershot 2
- Page 1 User Manual Racketclub Powershot 2 © De Racketclub, Arnold van Houten Version: 2.3, august 2016...
-
Page 2: Table Of Contents
Table of Contents 1. First use of machine..........................3 2. De different functions of the machine....................5 1. Fixed position..........................6 2. Depths............................7 3. 2-line and 3-line...........................8 4. Random balls..........................9 5. Cross balls..........................10 3. Speed, Frequency, Topspin and Slice balls..................11 4. Commands on the tenniscourt......................12... -
Page 3: First Use Of Machine
1. First use of machine When you use the machine for the first time “new out of the box”, there are some items to think of. First you should install some new parts in the machine and there are some subjects to think of when using the machine: First you find some fuses. - Page 4 shooting wheels will start turning and the machine automatically will start shooting after about 3 seconds. Press again the “>/||” button to stop the machine. The 2 front feet, at the bottom of the machine, will be responsible for the right angle of the •...
-
Page 5: De Different Functions Of The Machine
2. The different functions of the machine The machine has several functions for shooting the balls in different ways: The spin (topspin of slice) • At different speed • At different positions on the tenniscourt: • 1. Fixed position, the horizontal (3 positions) and vertical positions (2 positions) could be set preferable. -
Page 6: Fixed Position
1. Fixed position The ball could be shot at one position (Horizontal: Left, Middle, Right). This position could be set with the “<” and “>” buttons on the Remote Control. The vertical position could be set short or deep (by pressing “^” (deep) and “v” (short) buttons) but you can also set the position much higher (lobs) but this is a bit more difficult: 1. -
Page 7: Depths
2. Depths The machine can shoot at 2 different depths on the court (“High/low”). The horizontal position (Left, Middle or Right) stay the same then. To let the machine also vary with the horizontal position, you should use the “random function”. To let the machine shoot at 2 different depths, you do: 1. -
Page 8: Line And 3-Line
3. 2-line and 3-line The machine can shoot the ball at 2 or 3 horizontal positions. The 2-line could be used for 2 (groups of) players to alternately get a ball at exact the same positions of the groups. When the player of the left group hit the ball, the machine move to the right group and shoot the ball. -
Page 9: Random Balls
4. Random balls The machine can shoot the balls at random horizontal positions at the court or at 2 vertical positions (2 depths) as well. 1. To let the machine shoot random horizontally and vertically, press the “Random” button once. The display shows 6 points at the display. 2. -
Page 10: Cross Balls
5. Cross balls The machine could shoot 2 cross balls at 2 different positions (skew). There are 6 different combinations of playing the 2 balls, the number of pressing “Cross” gives a different combination: 1. Right short, Left deep 2. Left short, Middle deep 3. -
Page 11: Speed, Frequency, Topspin And Slice Balls
3. Speed, Frequency, Topspin and Slice balls All trainings, which could be set on the ball machine, can be changed for the speed. Also, just like a tennis player, the ball machine can hit the balls with less/more speed or with topspin/underspin(slice). -
Page 12: Commands On The Tenniscourt
4. Commands on the tenniscourt Higher < F > Left/Fixed//Right Lower VERT = High/Low (Vertical) button HOR = Horizontal button RAN = Random button CROSS = Cross button Press button → Trainings 1 fixed position (3 positions: L, M, R) To the Right >... - Page 13 Short Set the High/low height (when at the right height) Set Hor. > Position during the < already set height 3-line short 3-line deep 2-line short 2-line deep Hor. Random Vert. 2 pos.
- Page 14 Hor: random Vert: short (when ball is played short) Hor: random Vert: deep (when ball is played deep) 2 cross balls (seen from player) 1 right short 2 left deep CROSS 1 left short 2 middle CROSS deep 1 middle short CROSS 2 right deep...