Download Print this page

Maintenance; Specifications - JB Systems DMX RECORDER REMOTE Operation Manual

Hide thumbs Also See for DMX RECORDER REMOTE:

Advertisement

ENGLISH
FUNCTIONS
1. [CHASE] BUTTONS (1-8): used to select the
recorded chase(s) to play.
2. [PLAY] BUTTON: used to play the selected
chase(s).
3. [STOP] BUTTON: used to stop playing the
running chase(s).
4. [BLACKOUT] BUTTON: used to cut the output
of the [DMX RECORDER].
CONNECTIONS
Use an optional network cable Cat5E, Cat6E (or higher) to connect the [DMX RECORDER REMOTE] to the
[DMX RECORDER]

MAINTENANCE

• Make sure the area below the installation place is free from unwanted persons during servicing.
• Switch off the unit, unplug the mains cable and wait until the unit is cooled down.
During inspection the following points should be checked:
• All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
• Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
• When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
• The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
• In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
• The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
• The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
• Clean the external optics at least once every 30 days.
• Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS

This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Size (W,H,D):
Weight:
JB SYSTEMS
®
20,2 x 13,5 x 3,5 cm
520 g
3/4
USER MANUAL
DMX RECORDER REMOTE

Advertisement

loading