Advertisement
Quick Links
MNTV2XB - Junction Box Mount
(See step 4 on reverse for compatibility with Digimerge cameras and accessories)
CONTENTS
1 x Junction Box (IP66)
1 x Mounting Template
4 x Junction Box Mounting Screws (PWA4x30)
4 x Rubber Mounting Screw O-Rings
5 x Cover Screws (Silver PM4x8)
4 x Short Camera/Accessory Mounting Screws (PM4x8)
4 x Long Camera/Accessory Mounting Screws (PM4x14)
1 x Conduit Key
2 x Cable Holders
PARTS OVERVIEW
Conduit Seal Caps
3/4"-14 NPS (Preattached)
Conduit Seal O-Rings
(Preattached)
Junction Box
Mounting Screws
with Rubber O-Rings
Back Box
Short Camera
Mounting Screws
MNTV2XB_INSTALLATION DIAGRAM_EN_R1
DIMENSIONS
136.8mm
Top Plate Rubber
Seal (Preattached)
Long Camera
Mounting Screws
Weight: 0.8kg / 1.76lb
Hinge Screw
Cable Plate (Preattached;
see reverse for details)
Conduit Key
Cable Holders
50.5mm
Cover
Cover
Screws
Advertisement
Summary of Contents for Digimerge MNTV2XB
- Page 1 MNTV2XB - Junction Box Mount (See step 4 on reverse for compatibility with Digimerge cameras and accessories) DIMENSIONS CONTENTS 136.8mm 1 x Junction Box (IP66) 50.5mm 1 x Mounting Template 4 x Junction Box Mounting Screws (PWA4x30) 4 x Rubber Mounting Screw O-Rings...
- Page 2 (depending on model). 4. Install the camera or mounting bracket to the cover using the camera mounting screws (PM4x8 or PM4x14). See the table below for a list of compatible Digimerge products. Mounting Holes Symbol Compatible Digimerge Products DPV34D, DPV24D, DPV24DL,...