Download Print this page

Advertisement

Quick Links

Respected User:
Hello! First of all, thank you very much for using our
company's series of products. It is our greatest honor to
be able to serve you. Your recognition and support is our
driving force!
Our company's series of products have perfect warranty
and excellent service quality, so they are supported and
praised by customers. Since its establishment, the
company has been adhering to the business philosophy
of "customer first, quality first"; fulfilling the service tenet
of "taking the opportunity, pioneering and innovating, and
developing products with strong competitiveness";
running through "people-oriented, reputation first"
"Corporate culture."
Please read this manual carefully before using the
driving recorder. The manual is illustrated in an illustrated
manner, with a detailed illustration of the operation of the
product. In addition, due to the different production date
and batch of the product, the description may differ from
the actual product used. Please refer to the actual
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the T33 and is the answer not in the manual?

Questions and answers

Summary of Contents for Anytek T33

  • Page 1 Respected User: Hello! First of all, thank you very much for using our company's series of products. It is our greatest honor to be able to serve you. Your recognition and support is our driving force! Our company's series of products have perfect warranty and excellent service quality, so they are supported and praised by customers.
  • Page 2 product. Thank you again for your support and patronage, and sincerely hope that you will give us your feedback during the use process. Your axe and support is our driving force! "Happy to go out and go home safely" is our greatest wish.
  • Page 3 yourself. This can result in equipment damage. Please send a special authorized service center for repair。 ◆Temperature humidity The normal operating temperature of the equipment is +0 ° - +40 °, humidity 10% - 80%.Keep the device in a safe location ◆Transport - In the case of sudden changes in temperature or humidity, it may cause moisture to condense inside the...
  • Page 4 blue mirror 3.Support full-featured ADAS (driving safety assistance function) 4.Support WDR/HDR (HD night vision wide dynamic / high dynamic) technology 5.Built-in EIS electronic image stabilization technology 6.Built-in DDR to reduce system interference 7.Germany Conte three-dimensional frameless precision lens process 8.6G A+Multilayer filter resolution lens 9.170 degree Big wide angle...
  • Page 5 Appearance and button function description USBpower Digital Rear TF Card supply Camera slot Electronic logger reservation Reset hole Speaker interface...
  • Page 6 camera Power button 9 Up button Menu 10 OK Button 11 Down button 12 button LCD screen Power button / screen backlight switch button Press 【Power button】 in the off state to turn on the power of the unit.,The machine starts working automatically.
  • Page 7 Mode Button In the standby state, cyclically switch the camera/playback mode. Up button/lens channel switching Short press to toggle menu options or files during setup operation. During video playback, press 【UP】 to rewind playback, press【Enter】to end rewind, short press in the camera to switch the lens channel.
  • Page 8 “Setting Menu” interface, press up/down to switch setting item, press【Enter】 to confirm setting Reset button When the machine is abnormal due to improper operation, press the reset button and then turn it on again, the machine can resume normal use.。 Installation guide Turn off the car engine。...
  • Page 9 edge of the windshield of the car during wiring. Install the rear camera on the rear of the vehicle and pay attention to the direction when installing. Wiring can be laid along the roof of the vehicle. After the installation is complete, connect the rear camera to the rear camera interface of the recorder.
  • Page 10 road. When the vehicle speed reaches the set speed, the recorder will judge whether the lane is offset according to the virtual solid line of the road. If it is offset, a warning sound will appear. to remind the driver that the driveway has been offset to prevent the driver from a safety accident caused by distraction or fatigue.
  • Page 11 and shuts down. The recorded image segment is saved on the TF card. If the loop recording function is turned on, the recorder will overwrite the image recorded earlier when the TF card is full. The video duration can be set in the menu by itself, and the range is 1 minute / 3 minutes / 5 minutes.
  • Page 12 video files recorded by “front camera”, “rear camera” , “front camera encryption” and “rear camera encryption”. Select the corresponding file and click the right small window to play back.。Click in the playback interface“ ”Lock/unlock the current file,Click“ ” Can delete the current file,Click“ ”...
  • Page 13 interface. ◆Time/date setting In the main interface, click " " to enter the function setting interface, enter the interface and click " " " " to find the "date / clock" option, then click "click reset" pop-up date / clock settings menu and by clicking " "...
  • Page 14 car is slightly vibrated in the off state, the recorder will automatically start recording. If it is in the off state, it will be recorded for 30 seconds and then turned off. The recorded image is a special image. , will not be covered by the loop.
  • Page 15 1080P(1920x1080), Video resolution 720P(1280x720), Photo resolution (2M)1920*1080 Storage H.264 compression Video format Image Format JPEG stored -20℃~65℃ temperature Operating 0℃~40℃ temperature Operating 15-80%RH humidity Memory card Maximum support 64GB capacity transfer speed USB2.0 Built-in speaker 8Ω 1W...
  • Page 16 Built-in High fidelity microphone microphone battery Large capacity 500MAh Car power MIN USB 12V~40V output 5V supply DC Foot 2A Note: Specifications may be changed due to upgrades, updates, etc., subject to the actual product. Simple Problem Elimination If a failure occurs, try the following methods to troubleshoot it.
  • Page 17 Video is not clear - Make sure the camera lens is clean. - Wipe off dust and dirt from the lens before shooting. The device works fine, but the button does not work. - Press the reset button to initialize the machine. In general, please use the reset button to initialize with caution, which may result in data loss.