Grossenbacher Systeme SmartPanel SP-240 Device Description

Hardware

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

DEVICE DESCRIPTION

SmartPanel

Hardware

Grossenbacher Systeme AG

Spinnereistrasse 10, CH-9008 St. Gallen

Phone +41 (0)71 243 29 29 / Fax +41 (0)71 243 29 28

info@gesys.ch / www.gesys.ch

DVS 63067-V3.0

SP-240

Grossenbacher Systeme GmbH

Ruhrstrasse 15, DE-63452 Hanau

Phone +49 (0)6181 6751 999/ Fax +49 (0)6181 6751 998

sales.de@gesys.ch

Table of Contents

Need help?

Do you have a question about the SmartPanel SP-240 and is the answer not in the manual?

Questions and answers

Summary of Contents for Grossenbacher Systeme SmartPanel SP-240

Page 1 DEVICE DESCRIPTION SmartPanel Hardware SP-240 Grossenbacher Systeme AG Grossenbacher Systeme GmbH Spinnereistrasse 10, CH-9008 St. Gallen Ruhrstrasse 15, DE-63452 Hanau Phone +41 (0)71 243 29 29 / Fax +41 (0)71 243 29 28 Phone +49 (0)6181 6751 999/ Fax +49 (0)6181 6751 998 info@gesys.ch / www.gesys.ch...
Page 2 Grossenbacher Systeme AG. Grossenbacher Systeme AG does not accept any liability for damages arising from the use of any incorrect or incomplete information contained in this documentation or any information missing therefrom.
Page 3 No liability is accepted for claims for damages arising from a failure or functional defect in the device. All data specified in this document does not represent guaranteed specifications in the legal sense. © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 5: Table Of Contents
9.3 Diagnostics................31 10 Maintenance and repair..........33 11 Technical data.............. 35 12 Disposal................ 37 13 EU Conformity and Standards ........39 14 Revision history............41 15 Alphabetical index ............43 © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 7: Explanation Of Symbols
Important information about the product or the relevant section of the document, requiring the particular attention of the reader. The “Information” pictogram has the following meaning: Indicates important and instructional information. © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 9: Introduction
3,5“, 4,3“, 5,7“ or 7“ TFT display with LED backlight and touch screen, Ethernet, USB-Host and CAN on-board, the devices perfectly fits together with the openAutomation software solutions of Grossenbacher Systeme In the basic configuration the device can be used as „HMI“ or as a user programmable „HMI-Open“...
Page 11: Device Versions
SmartPanel 4,3” TFT 480x272 64k colours Resistive-Touchscreen SP-240-05R-000 Ord.No.: 50 81 864 SmartPanel 5,7” TFT 640x480 64k colours Resistive-Touchscreen Ord.No.: 50 81 865 SP-240-07R-000 SmartPanel 7” TFT 800x480 64k colours Resistive-Touchscreen © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 12: Accessories
Onboard Flash Micro-SDCARD Ord.No: 32 01 381 Micro-SDCARD 1GB, INDUSTRIAL Ord.No: 32 01 382 Micro-SDCARD 2GB, INDUSTRIAL Stecker für Ord.No: 12 17 013 3pol Phoenix Contact, MSTB2.5/3-STF-5.08 Stromversorgung DVS 63067 V2.0 © 2011 by Grossenbacher Systeme AG DVS 63067-V3.0...
Page 13: Features
Optional via USB Type CiA V2.0 Part B; max. 1MBaud; not isolated 8,5VDC to 30VDC, NOT isolated Power supply Type Retain data will be saved on power fail to Flash © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 15: Commissioning
Operation, however, is only possible if the connection was made correctly. Connections for the SmartPanel must comply with specific, local regulations. © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 16: Power Fail And Ups
5.5 S ETUP OF If the device is powerless for a long time (more than 1 week), it may be necessary to setup the Time and Date again. DVS 63067 V2.0 © 2011 by Grossenbacher Systeme AG DVS 63067-V3.0...
Page 17: Preparing The Shield Connections
Connection work should be carried out with special care in order to ensure trouble-free operation. The EMC values stated in the technical data can only be guaranteed if the cables are prepared according to the following specifications. © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 18: Connecting The Ethernet
The USB Interface is compatible to USB-standard Version 2.0 The use of the USB-Interface requires support by the operating system. Cables connected to the USB must be laid separately from the low-voltage cables. DVS 63067 V2.0 © 2011 by Grossenbacher Systeme AG DVS 63067-V3.0...
Page 19: Connection For Com1 Serial Interface
11-bit identifier. The type of configuration selected depends on the software protocol. The baud rate can be selected in a wide range, and only the standard CiA baud rates are implemented. © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 20 The figure shows the minimum wiring with shielding between two bus stations with the Sub-D connector as an example. A bus terminating DVS 63067 V2.0 © 2011 by Grossenbacher Systeme AG DVS 63067-V3.0...
Page 21 Ground. Pins 4, 5 and 8 must not be connected! The CAN bus driver is fed internally. Baud rate and cable lengths Baud rate Max. length 20kBit/sec 2500m 25kBit/sec 2000m 50kBit/sec 1000m 100kBit/sec 650m 125kBit/sec 500m 250kBit/sec 250m 500kBit/sec 100m 1Mbit/sec © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 22: Inserting / Removing The Micro-Sdcard
(s.a. system description WindowsCE) 5.12 T EMPERATURE SENSOR CONNECTOR The Temperature sensor connector can be used to connect a KTY10-6 (= KTY81-210) sensor to measure e.g. the room temperature. DVS 63067 V2.0 © 2011 by Grossenbacher Systeme AG DVS 63067-V3.0...
Page 23: Operation
Ensure that the seal is fitted correctly on the front panel. Avoid tightening torques of greater than 0.5 Nm as this could otherwise damage the device. The thickness of the front panel must not exceed 2.5 © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 24: Front Panel Cutout 3,5" To 7
SmartPanel Hardware 7.3 F 3,5“ 7“ RONT PANEL CUTOUT Tolerance for panel cutout +0/-0.5 mm The thickness of the front panel must not exceed 2.5 DVS 63067 V2.0 © 2011 by Grossenbacher Systeme AG DVS 63067-V3.0...
Page 25: Mechanical Dimensions - Frontside 3,5" To 7
SmartPanel Hardware 7.4 M 3,5“ 7“ ECHANICAL DIMENSIONS RONTSIDE Dimensions – 3,5" © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 29: Notes On The Touch-Screen
For an optimal operation of the resistive touch-screen it is recommended to use a touch-pen for the calibration. (s.a. manual system description WindowsCE) © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 31: Backlight, Contrast
(crosslink/direct). The LINK LED is lit when the connection is correct The ACT LED is lit (flashing during transfer) with a correct data transfer - Incorrect/invalid IP address set © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 33: Maintenance And Repair
Section 11) has to be observed. Storage The device has to be stored under the conditions specified in Section 11. It is recommended to store the device at room temperature. © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 35: Technical Data
EN 61000-4-4 0.5kV / 0.5kV EN 61000-4-5 10Vrms EN 61000-4-6 Emission Residential EN 61000-6-3 Degree of Front IP 65 (NEMA 12), after EN 60068-2-68 protection note section 7.1 Rear IP20 © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 36 CAN, not isolated CiA, D-Sub 9 Pol male Kap. 5.10) Temp.connector Connector for KTY10-6 (= KTY81-210) sensor Kap.Fehler! Verweisquelle konnte nicht gefunden werden.) Micro-SDCARD Micro-SDCARD Exchangeable storage device Slot DVS 63067 V2.0 © 2011 by Grossenbacher Systeme AG DVS 63067-V3.0...
Page 37: Disposal
SmartPanel devices that are no longer used must be disposed of properly or returned to the manufacturer for disposal. (manufacturer's address Section 13) Materials: Housing: Galvanized sheet steel Front frame: Plastic Printed-circuit board: 1. quality Front: Polyester/glass laminate © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 39: Eu Conformity And Standards
The following standard was used to assess the electrical safety of the SmartPanel: EN 60950 und EN 50178 Manufacturer: Grossenbacher Systeme AG Manufacturer address: Spinnereistrasse 10 CH-9008 St.Gallen Switzerland © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 41: Revision History
+41 (0)71 243 29 28 Email info@gesys.ch Homepage www.gesys.ch Branch Germany: Grossenbacher Systeme GmbH Ruhrstrasse 15 D-63452 Hanau Germany +49 (0)6181 6751 999 +49 (0)6181 6751 998 Email sales.de@gesys.ch Homepage www.gesys.ch © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 43: Alphabetical Index
Weight................38 Inserting /Removing the Micro-SDCARD....22 Introduction..............9 Keyboard..............13 Maintenance and repair..........35 Manufacturer..............41 Manufacturer address........... 43 mass storage..............13 Mechanical dimensions - Frontside ......26 © 2011 by Grossenbacher Systeme AG DVS 63067 V2.0 DVS 63067-V3.0...
Page 44 DVS 63067-V3.0...

This manual is also suitable for:

Sp-240-03r-000 Sp-240-04r-000 Sp-240-05r-000 Sp-240-07r-000

Grossenbacher Systeme SmartPanel SP-240 Device Description

1 Explanation of Symbols

2 Introduction

3 Device Versions

4 Features

5 Commissioning

6 Operation

7 Mounting Instructions

8 Notes on the Touch-Screen

9 Backlight, Contrast

10 Maintenance and Repair

11 Technical Data

12 Disposal

13 EU Conformity and Standards

14 Revision History

15 Alphabetical Index

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Grossenbacher Systeme SmartPanel SP-240

This manual is also suitable for:

Table of Contents