SETTINGS
Screen Saver
Screen Saver - Press ▲,▼ button to select the option
then press OK button to enter the sub-menu.
(Optional: Turn screen o , Backdrop, Colors).
When to Start - Press ▲,▼ button to select the
option then press OK button to enter the sub-menu.
(Optional: 5 minutes, 10 minutes, 30 minutes, 1 hour,
2 hours).
Put device to sleep - Press ▲,▼ button to select the
option then press OK button to enter the sub-menu. (Optional: 30 minutes, 1
hour, 3 hours, 6 hours, 12 hours, Never).
Start now - Press ▲,▼ button to select the option then press OK button to
enter screen saver.
Location
Location status- Press ▲,▼ button to select the
option then press OK button to enter the sub-menu.
(Optional: Use Wi-Fi to estimate location, O ).
Usege & Diagnostics
Usege & Diagnostics- Press ▲,▼ button to select
the option then press OK button to choose ON/OFF.
Accessibility
Audio Description - Press ▲,▼button to select the
option then press OK button to choose ON/OFF.
Visually Impaired - Press ▲,▼button to select the
option then press OK button to enter the sub-menu.
(Need: Audio Description ON).
Hearing Impaired - Press ▲,▼button to select the
option then press OK button to choose ON/OFF.
Captions - Press ▲,▼button to select the option
then press OK button to enter the sub-menu.
High contrast text - Press ▲,▼button to select the
option then press OK button to choose ON/OFF.
Reset
Screen saver
Press OK button to enter the sub-menu.
Reset-Erase everything.
Screen saver
Backdrop
Remote & Accessories
When to start
In this menu, you can pair Bluetooth
After 5 minutes of inactivity
devices.
Put device to sleep
1. Press the "RED" and "BLUE" buttons
After 30 minutes of inactivity
at the bottom of the remote control for
Start now
5 seconds.
2. When the LED starts to flash, release
it. The remote controller will send the
pairing signal to the TV and display the
information fo the remote control on the
right side of the screen.
3. Press the OK button to display the
pairing. If the paired is displayed, the connection is successful.
4. If the couldn't pair appears, the connection fails. Wait 30 seconds and then
press the "RED" and "BLUE" buttons at the bottom of the remote control for
5 seconds to repeat the previous steps.
6. Press BACK button return to the previous menu.
14