dehn HVI head holder Instruction Leaflet page 2

GB
GB Instruction leaflet
Application
The HVI head holder allows to use a cordless screw driver for removing the outer sheath and the PE
®
insulation of HVI Conductors.
The following stripping inserts from DEHN + SÖHNE can be used with the HVI
stripping length of 35 mm):
®
HVI head 20

Assembly
The male connector of the relevant stripping insert is inserted in the female connector of the HVI
holder and turned clockwise (bayonet cylinder with two pins) to firmly fix it. After that, the triangular
bolt of the HVI®head holder is inserted in the three-jaw chuck of the cordless screw driver and fixed by
means of the quick-release clamping mechanism (see Fig. 1)
triangular bolt (Ø 10 mm)
for three-jaw chuck
female connector of the bayonet
coupling (two recesses for the pins)
male connector of the bayonet coupling
(bayonet cylinder with two pins)
Fig.
1
®
HVI head 27

HVI ® head 20
HVI ® head 27
Publication No. 1859 / UPDATE 04.14 Mat. No. 3001062
HVI ® head holder
Wear protective goggles when using the
!
HVI ® head holder with HVI ® head...
stripping insert!
head holder (preset
®
head
®
standard cordless
screw driver with
three-jaw chuck