Advertisement
Quick Links
THANK YOU
Thank you for purchasing the FlexView™ FVS IFP series fixed height cart. Please read these
instructions thoroughly before installing this product.
PRODUCT FEATURES
• Middle Atlantic PD-815SC (8) outlet, 15 amp power strip with surge and circuit breaker
• Simple display mounting with manual adjustment of display height
• Lever Lock™ for easy mounting of codecs and smaller components
• Adjustable cable management included
Instruction Sheet
FlexView ™
FVS IFP Series Fixed
I-00871
Rev -
Advertisement
Related Manuals for Middle Atlantic Products FlexView FVS IFP Series
Summary of Contents for Middle Atlantic Products FlexView FVS IFP Series
- Page 1 Instruction Sheet FlexView ™ FVS IFP Series Fixed THANK YOU Thank you for purchasing the FlexView™ FVS IFP series fixed height cart. Please read these instructions thoroughly before installing this product. PRODUCT FEATURES • Middle Atlantic PD-815SC (8) outlet, 15 amp power strip with surge and circuit breaker •...
- Page 2 GROUNDING INSTRUCTIONS / INSTRUCTIONS DE MISE À LA TERRE This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
- Page 3 IMPORTANT SAFETY INSTRUCTIONS / INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ CAUTION! To avoid an unstable condition, place heavier WARNING/CAUTION! The exclamation point within an components at the bottom of the cabinet. When more than equilateral triangle is intended to alert the user to the one component is placed in the cabinet, begin at the presence of important operating and maintenance bottom of the cabinet and place equipment at the lowest...
- Page 4 IMPORTANT SAFETY INSTRUCTIONS When using an electrical furnishing, basic precautions should always be followed, including the following: • For institutional use. • Read and follow all instructions before using. • WARNING – Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on the child.
- Page 5 INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ Lorsque vous utilisez des mobiliers électriques, toujours respecter les précautions de base, notamment : • Usage institutionnel. • Lire et suivre toutes les instructions avant l'utilisation du matériel. • AVERTISSEMENT - Des blessures graves ou mortelles peuvent survenir si un enfant grimpe sur le meuble d'un équipement audio ou vidéo.
- Page 6 WEIGHT RATINGS ITEM DETAILS 300 lbs. (136.1 kg) Maximum Display 320 lbs. (145.2kg) Maximum Display (Including Camera Mount and Soundbar Mount) 50 lbs. (23 kg) Maximum Internal 370 lbs. (168 kg) Maximum Total Rated Load CAMERA MAXIMUM: 20LBS (9.1KG) DISPLAY MAXIMUM: 300 LBS (136.1KG) SOUNDBAR MAXIMUM: 20LBS (9.1KG) WARNING - This cart is intended for use only with the products and maximum weights indicated.
- Page 7 NOTE: Push levers to lock, lift levers to unlock. To prevent FlexView from moving, lock casters perpendicular to each other as shown OPTIONAL LEVELING FEET For xed location installations, Middle Atlantic Products o ers a leveling foot kit FVS-LEVELERS-4 to replace the supplied casters. Page 7...
- Page 8 SUPPLIED COMPONENTS AND HARDWARE NOTE: Additional hardware is included FLAT PANEL MOUNTING HARDWARE that may not be required for your installation. M4 x 16 (Qty 8) (Qty 4) M4 x 25 M5 x 12 (Qty 8) 5/16” Flat Washers (Qty 10) M5 x 16 (Qty 6) M5 x 20...
- Page 9 DOOR REMOVAL 1. Pull latch on bottom door panel, tilt and lift off to expose rear component and storage compartment. (FIGURE A) 2. To reinstall, hook the bottom of door panel tilt up and latch panel in place. For equipment security, door panel can also be locked.
- Page 10 DISPLAY ARM ADJUSTMENT NOTE: Fixed cart is designed to provide 20” of display adjustment in 2” increments. Lowest postion being 40” from the ground and highest being 60” from the ground. To adjust display arm to desired height: 1. With back door panel removed, unscrew and remove (6) 1/4-20 bolts (4 short & 2 long), spacers, hex nuts and display arm.
- Page 11 DISPLAY ARM ADJUSTMENT (CONTINUED) 1. Using (2) previously installed long 1/4-20 hex bolts and spacers insert bolts into adjustment holes at the desired display arm height. (FIGURE C) 2. Loosely thread (2) hex nuts onto bolts through the back of the unit to hold display arm in place. Long Hex Bolt Cable Access Locations...
- Page 12 DISPLAY INSTALLATION NOTE: If installing optional Camera Mount or Soundbar Mount, they must be installed prior to installing display. Refer to instructions I-00875 for Camera Mount and I-00876 for Soundbar Mount. Selecting The Mounting Hardware To Attach Brackets To Display 1.
- Page 13 DISPLAY INSTALLATION (CONTINUED) Mounting Screws (4) Universal Washers (4) Display Mount Brackets (2) FIGURE G Nylon Spacers (FIGURE H) Nylon spacers add distance between Display Mounting Brackets and display. They will fit all supplied screw sizes. The spacers must be used only when attaching displays which have: •...
- Page 14 DISPLAY INSTALLATION (CONTINUED) Hanging the Flat Panel 1. Tilt display and hook display mounting brackets onto flange of horizontal display bracket into grooves along the top of the bracket. (FIGURE J) 2. Center display on horizontal display bracket, then push along the bottom of display until both display mount brackets click into place.
- Page 15 FLAT PANEL INSTALLATION (CONTINUED) 4. Once display installation is complete, use level adjustment screws on top of display mount brackets to level display. (FIGURE M) 5. For security, a lock (not supplied) can be attached to security holes on both display mount brackets. Leveling Screws FIGURE M Bracket...
- Page 16 LEVER LOCK™ TOOL FREE INTERNAL MANAGEMENT SYSTEM The FlexView comes equipped with the following Lever Lock™ items: (6) LL receptacle brackets, (2) LL-HC21 horizontal channels, and (1) LL-VP1710 vertical 10” deep plate. Use Receptacle Brackets To Lace Cable Bundles Use Vertical From Top To Bottom Plate To Mount Small Devices...
- Page 17 CABLE MANAGEMENT / EQUIPMENT MOUNTING 1. Cable clips can be installed using supplied 8-32 pan head screws anywhere along the two grooves down left or right extrusions. Cables can be secured to movable clips or Lever Lock panels or brackets using supplied wire ties. (FIGURE S) Cable Clip Grooves Cable Clip...
- Page 18 Voice: 613-836-2501 - Fax: 613-836-2690 ca.middleatlantic.com - customerservicecanada@middleatlantic.ca Factory Distribution USA: NJ - CA - IL Canada: ON At Middle Atlantic Products we are always listening. Your comments are welcome. Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.