Table of Contents
Advertisement
Quick Links
®
PicoP
Display Engine Evaluation Kit, 3
© 2011 MicroVision, Inc. All rights reserved. PicoP is a trademark of MicroVision, Inc.
MicroVision, Inc. 6222 185th Avenue NE • Redmond, WA 98052 •Tel: 866.662.3797 •
(PEK3 with HDMI)
User's Guide
P/N: AB0132186-001
Contact info:
Techical Support
Phone: 1-866-662-3797 (Monday through Friday 6:00 am – 5:00
pm PST)
techsupport@microvision.com
Doc. No. DA0132431, Rev. A.1
rd
Generation
www.microvision.com
Advertisement
Table of Contents
Summary of Contents for MicroVision PicoP PEK3 with HDMI
- Page 1 Phone: 1-866-662-3797 (Monday through Friday 6:00 am – 5:00 pm PST) techsupport@microvision.com © 2011 MicroVision, Inc. All rights reserved. PicoP is a trademark of MicroVision, Inc. MicroVision, Inc. 6222 185th Avenue NE • Redmond, WA 98052 •Tel: 866.662.3797 • www.microvision.com...
- Page 2 Agreement will be free of defects in material and workmanship for forty-five (45) days from the shipping date. Microvision will at its option, repair or replace the PEK3 or refund the purchase price paid by Customer for the defective PEK3. The repaired or replaced parts or PEK3 may include new, reconditioned or re-manufactured parts and equipment at Microvision’s option.
- Page 3 Table of Contents ® PicoP Display Engine Evaluation Kit, 3 Generation ............1 CHAPTER 1: IMPORTANT INFORMATION ................. 4 Safety Information ......................4 Caution & Warnings ......................4 CHAPTER 2: DEFINITIONS ....................5 ® PicoP Display Engine (PDE) .................... 5 ®...
- Page 4 Combining the incorrect boards/optical modules, could damage the mirror. More importantly, this will invalidate the laser product classification certification for the module and will invalidate any warranties that may apply. The PicoP Display Engine is Microvision, Inc. Proprietary & Confidential under our Non-Disclosure Agreement (NDA). Doc. No.: DA0132431, Rev. A.1...
- Page 5 CHAPTER 2: DEFINITIONS ® PicoP Display Engine (PDE) The PDE consists of an Integrated Photonics Module (IPM) and drive electronics board. The PDE electronics is enclosed in EMI shield as shown below. Exit Aperture Integrated Photonics Module (IPM) PDE Electronics Board (under the shield) Electronics Board Shield...
- Page 6 ® PicoP Evaluation Kit (PEK3) The core of PEK3 is a PDE. PEK3 provides an enclosure and covers (mechanical case) for the PDE. The PDE interfaces to a media module that allows the customer to connect to their preferred video source. The video interfaces supported by PEK3 are HDMI and VGA.
- Page 7 CHAPTER 3: GENERAL INSTRUCTIONS Input Video The PDE module accepts digital RGB (5-6-5) video input. PEK3 with HDMI is equipped with VGA and HDMI interface. VGA and a HDMI video cables are included with the shipping kit to enable user to connect it to a PC or other video host device.
- Page 8 Troubleshooting Problem Remedy No power Check if power cable is properly inserted. Microvision splash screen should come up. No video(1) Check if unit is turned on. Make sure video cable is inserted properly into the connector and blue LED is on.
Need help?
Do you have a question about the PicoP PEK3 with HDMI and is the answer not in the manual?
Questions and answers