Revision Record Issue Date Remarks Aug 2011 First issue...
Page 3
Introduction This kit provides a Bar Code Scanner for the following terminals. NCR RealPOS 25 (7610) NCR RealPOS 50 (7611) The assembly installs on the bottom of the terminal. 7409-K330 Bar Code Scanner...
Page 4
Components MS3207 Scanner Cable, Db9 to USB 497-0466203 Cable Cover Lock Plate 497-0473132 7610 Cable Cover 497-0473300 Screw, M3 x 0.5 x 6 mm, FH 006-8612557 Screw, 6-32 x 5/16, Phillips, FH 006-8611269 MS4980 Scanner Bracket 497-0473130 MS3207-1000 MiniScan 006-8612581...
Installation Procedures 1. Unplug the terminal power cord and turn off the power to any connected peripheral devices. 2. Remove the terminal Cable Cover. 3. Connect the scanner cable to a USB Connector on the I/O Panel. USB B USB A...
Page 6
4. Install the Scanner Assembly onto the bottom of the terminal. There are no fasteners, the plastic Cable Cover snaps into position on the terminal Rear Cover.
Need help?
Do you have a question about the 7409-K330 and is the answer not in the manual?
Questions and answers