OfficeFurniture.com Single Guest Chairs Assembly Instructions

Tools required:
9/16" ratchet, Allen wrenches (included in hardware pack)
Note:
These instructions are intended for various models and configurations, with and without arms. Your products may not look
exactly as those shown in the diagrams.
Important:
The assembly process requires that some hardware be kept loose until later in the sequence. Follow these instructions
closely to ensure correct assembly.
Recommendation:
Retighten all bolts on a seasonal basis to ensure your product remains strong and stable for many years of
use.
Weight Capacity:
All chairs in these series have a weight capacity of
Parts List
Leg Frames, left & right
Lower Cross Tube (1" dia)
Back Cross Tube (½" dia)
Seat Cushion
Back Cushion
Hardware Pack
2" Allen Bolts , 2 pcs.
½" Allen Bolts, 2 pcs.
3" Hex Bolts, 2 pcs.
Washers, 2 pcs.
3" Allen Bolts, 4 pcs.
Allen Wrenches, 2 pcs.
1. Unpack and identify all parts.
2. Connect lower cross tube between leg frames using 2"
Allen bolts as shown in figure 1. Keep these bolts loose
for now. (Leave about ¼" of exposed threads)
3. Connect back cross tube between leg frames using ½"
Allen bolts as shown in figures 1 and 2. Align holes and
insert bolts from front of chair. Tighten these 2 bolts
securely.
4. Tighten lower cross tube bolts from step 2 tightly. Before
doing so, make sure all four feet are sitting on a flat
surface and make sure overall frame assembly is not
leaning to one side or the other.
5. Attach seat cushion to back cushion using 3" hex bolts
and washers as shown in figure 3. Keep these bolts
loose for now.
6. Set cushion assembly into chair frame as shown in
figure 4. Align holes in frame with holes in seat cushion
and connect using 3" Allen bolts as shown in figure 5.
Tighten these bolts securely while making sure seat
cushion is centered between front legs tubes.
7. Tighten 3" hex bolts from step 5 securely at this time
while making sure back cushion is centered between
back leg tubes.
8. Your product is now assembled and ready to use.
Assembly Instructions
For Single Guest Chairs
Single Chairs
Right Leg
Frame
Figure 5
275 lbs.
per seat, unless otherwise stated.
Back Cross
Tube
Lower
Figure 1
Cross Tube
Figure 3
Figure 2
Left Leg
Frame
Figure 4
May 2016