Download Print this page

Advertisement

Quick Links

GPS / Geotagging
Unleashed
Instruction Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Unleashed D200+ and is the answer not in the manual?

Questions and answers

Summary of Contents for Foolography Unleashed D200+

  • Page 1 GPS / Geotagging Unleashed Instruction Manual...
  • Page 2 Product Illustration (1) LED Area (2) 2.5mm Jack socket for Remote release (3) Attachment for leash (4) Connector for Nikon D200 and up...
  • Page 3 First use The Unleashed is designed to stay on the camera at all times. It has intelligent power-management features, and will not drain your battery while the camera is not used. Although the Unleashed works well with either setting, please turn OFF the "Auto meter off" feature in your cameras setup menu under "GPS"...
  • Page 4 Initial pairing with a new GPS Receiver • To carry out the pairing procedure, please turn off all bluetooth devices, to avoid interferences. • Turn on the GPS - it does not necessarily need to have a fix yet. • Turn on your camera, set it to single shot (S). Press the shutter and keep it pressed.
  • Page 5: Normal Use

    Normal use Turn on your GPS and your camera. The Unleashed will automatically connect to your GPS. The closer the GPS is to the Unleashed, the faster it will connect, and the more reliable the connection will be. If the GPS has a fix, the Unleashed will send the GPS data to the camera.
  • Page 6 • Green blinking once every 2.5 seconds: Bluetooth connection to GPS established, GPS has no fix, last known position is sent to camera. • Red blinking once per second: Bluetooth connection could not be established, last known position has expired, no GPS data is sent to camera.
  • Page 7 Detailed Functionality The Unleashed will try to connect to your GPS 5 times, for 5 seconds each time. The LED will alternatingly blink red and green while trying to connect. Whenever you tap the shutter button, the number of retries will be reset to 5, which will be indicated by faster blinking for 2 seconds.
  • Page 8 Whenever your camera is inactive for 2 minutes, the Unleashed will stop sending GPS data to the camera, and the GPS icon on the camera will disappear. This will allow the meter to go off, saving a lot of power (this is the equivalent to Nikon’s built-in "Auto meter off"...
  • Page 9 After 45 minutes of inactivity (the 15 minutes mentioned before + 30 minutes expiry time of the last known position), the Unleashed shuts itself down, and goes into deep sleep. In this mode it uses so little power, that it would take almost 2 years to drain your camera battery.
  • Page 10: Troubleshooting

    Usually even the backpack will work, this depends on your GPS. For more troubleshooting, please see www.foolography.com/support/unleashed/ . Firmware updates Instructions for firmware updates will come with each firmware update. Please check www.foolography.com/support/unleashed/...
  • Page 12 GPS / Geotagging Unleashed D200+ 4 260197 510010 www.foolography.com...