Safety Instruction (1) Read and keep the instruction manual for future reference. (2) Keep the machine on a stable desktop, which should be dry, ventilated and out of reach of children. (3) This machine is manufactured for 220/240 V please ensure connecting it to the correct electric outlet.
Read before first use (1) Please check and make sure brewing unit is locked, place container and drip tray in right position. (2) Fill the water tank with clean water. (3) For first use fill more than 30g coffee beans into the bean container. Note: Only coffee beans are allowed to be placed in the bean container, please don’t add water, coffee power, coffee bean mixed with stones or other hard objects inside the...
Function Introduction Turn On The SMART Barista. (1) Please press the power switch on front panel, The SMART Barista will start its self-test process. Please don’t operate the machine during this process. (2) After the self-test, The SMART Barista will start the heating and self-clean process, then it will enter the main function interface.
Main Function Interface 1. Espresso Function Press icon to make Espresso, users can also press icon to stop the brewing process at any time. Caution: the brewing unit will return to original position automatically after dispensing the espresso. Please do not operate the machine until the brewing process is completed.
(3.2) Milk Frother Process (Remarks: During milk frothing, users can press icon to stop the milk frothing at any time. The SMART Barista will continue to brew espresso as per below image.) (3.3) Espresso Process...
Page 9
“Coffee Ready” when finished users can also press icon to stop the brewing process at any time. Hot Water Function (1) Press icon and The SMART Barista will prepare hot water automatically, users can also press icon to stop the process at any time.
Page 10
4 function selections for Espresso, Coffee, Cappuccino and Latte. (2) Please use the coffee powder spoon accessory with The SMART Barista, and add only one spoon coffee powder, in the correct compartment for every cup of coffee.
(3) Choose your coffee type from the display, use the dial to control your coffee concentration and enjoy your coffee. Tip: If you don’t add coffee powder during the above process, the coffee machine will only deliver hot water from the coffee spout. This can be a simple cleaning process for the brewing unit and the inner coffee tube.
Page 12
Coffee Temperature Press icon, the display will give you the available temperature selection: Low, Middle and High. Please choose your required temperature, and press to confirm your selection. Led Light ON/OFF Press icon, the display will show LED Light ON/OFF selection: Please choose your required option, and press to confirm your selection.
Page 13
(3) Level 3: Remind you to descale after using 80L water (4) Level 4: Remind you to descale after using 50L water NOTE: When The SMART Barista reminds you to descale, please make sure the water container is full before you confirm to progress descaling.
Page 14
Favourite setting Press icon, the display will show 6 function selections for Espresso, Coffee, Cappuccino, Latte, Hot Water and Hot Milk. (1) Press icon the display will show the espresso volume adjustment function, please press “+” or “-” icon to set your required espresso volume, then press icon to confirm setting.
Page 15
(2) Press icon the display will show the coffee volume adjustment function, please press “+” or “-” icon to set required coffee volume, then press icon to confirm setting. (3) Press icon the display show the cappuccino strength adjustment function, please press “+”or “- ” button to adjust the espresso volume and milk frother time, then press icon to confirm setting.
Page 16
(5) Press icon, and press “+”or “- ” button to select required hot water volume, then press icon to confirm setting. (6) Press icon , for hot milk with froth, or for hot milk only. Please press “+” or “-” icon to set required volume, press icon to confirm setting...
Page 17
(Note: In order to save energy, The SMART Barista will power off automatically if users don’t operate the machine for the selected time; Users can also select “OFF” to cancel the auto-off function.)
Page 18
Press icon, the display will ask your confirmation for the factory reset, press , the setting of The SMART Barista will be set to the default factory setting. Users can also press to cancel the factory reset.
Cup Number Counter Press icon, the display will show the total number of Espresso, Coffee, Cappuccino and Latte made by The SMART Barista. Warning Icons (1) Water Shortage, please add water in water container.
Page 20
(2) Bean Shortage, please add coffee beans in bean container. (3) Brewing unit Missing, please make sure the brewing unit is placed correctly and locked well. (4) Waste Coffee Cake Container or Waste Water Container missing, please check if these two waste containers are placed correctly.
Page 21
(5) Waste Coffee Cake Container full, please empty container. (6) Side door open, please close the side door. (7) Tube Clogged, please power off The SMART Barista and make sure the water container is full, then Power on the machine again. If this...
Technical Specifications Voltage / Frequency 220-240 V 50/60Hz Rating Power 1200-1500 W Water Tank Capacity 2000 ml Bean Capacity 250 g (500-600 g using the extended chamber). Pump Pressure 19 Bar (Italian ULKA pump) Net weight 11.7 Kgs...
SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT OF THE BOX PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY WITH THE PROOF OF PURCHASE. SMART Barista/ SB6000 Should you have any questions, please contact the retailer where you purchased the item. Exclusively Manufactured and Distributed by: SMART Worldwide Ltd.
Need help?
Do you have a question about the Barista SB6000 and is the answer not in the manual?
Questions and answers