Advertisement
Add preset in patrol path:
(1) Set preset 92, call preset 1, start patrol 1 setting.
(2) Call preset 1, add preset 1 to patrol 1.
(3) Call preset 2, add preset 2 to patrol 1.
(4) Call preset 3, add preset 3 to patrol 1.
(5) Call preset 4, add preset 4 to patrol 1.
(6) Call preset 92, then call preset 9, save patrol 1.( need to set preset 9 ahead, then when call preset 9, it can be saved.)
The setting of preset standing time in patrol:
(1) Set preset 92,then call preset 10,start the setting of preset standing time.
(2) Call preset 30, set standing time to 30s.
The setting of preset running speed in patrol:
(1) Set preset 92,then call preset 11,start the setting of preset running speed.
(2) Call preset 40, set preset running time to 40.
For quickly serve user, our IP keyboard itself has set one short way for patrol setting: Press "Shot"+ 35, it can
start 1-8 presets patrol scanning. But need to set at least 1-8 presets in IP keyboard ahead.
8、 How to set the Speed via keyboard?
Answer: manual control PTZ speed has 3 level adjustable, press "Speed" on button, LDC screen will show numbers,
Press 1(slowest), 3(fastest).
9、 How to set the Pattern via keyboard?
Answer: press "pattern" button, LCD screen show" pattern", then press number key (i.e: 1, means preset 1), press"
Enter", call pattern 1 successfully. press "RUN" button, LCD screen show" RUN", then press number key (i.e: 1, means
pattern 1), press" Enter", call pattern 1 successfully (currently setting patrol via this way only can compatible with
Hikvision camera zoom)
10、 How to set Patten with MYTECH IP PTZ via keyboard?
Answer: specific function is achieved by the mode of preset call; for example: [93] + [PRESET] + [1] + [SHOT], which is
to set pattern 1. save mode is: [93] + preset 5. call mode is on in general preset of call, specific function is achieved by
the mode of preset call; for example: [93] + [SHOT] + [1] + [SHOT], which is to call pattern 1; please follow the steps like
patrol way.
Advertisement
