Kenwood DV-303 Service Manual page 12

DV-303
2-15 Disassembling the Intermediate Chassis
1. Push the stopper downward, then rotate it until it contacts
the Vertical cam.
2. Release the 2 tabs.
2-16 Disassembling the Vertical cam and Drive
gear
1. Rotate the Vertical cam until it reaches the contact
position.
2. Lift the Vertical cam straight upward to pull it out.
3. Remove the Drive gear.
12
DISASSEMBLY FOR REPAIR
2-17 Disassembling the Pulley Gear and
Deceleration Gear
1. Remove the screw.
2. Remove the pulley gear.
3. Remove the belt.
4. Remove the deceleration gear.
2-18 Disassembling the Mechanism Loading
C.B.A.
1. Remove the 2 screws.
2. Remove the 2 screws.
3. Release the three tabs.