Page 4
Installation instructions CANremote CR3114 1 Preliminary note This document applies to devices of the type "CANremote" (art� no�: CR3114)� Read this document before use to familiarise yourself with operating conditions, installation and operation� Keep this document during the entire duration of use of the device�...
Page 5
The device is designed for supply via a mobile on-board system (12/24 V DC battery operation)� The connection terminals may only be supplied with the signals indicated in the technical data and/or on the device label and only the approved accessories of ifm electronic may be connected� 2.4 Tampering with the device In case of malfunctions or uncertainties please contact the manufacturer�...
Page 6
(1) This device must not cause harmful interference, and (2) this device must tolerate interference including interference possibly causing undesired operation� Cautionary Information: Any changes made to this device without express consent of ifm electronic gmbh may invalidate FCC approval to operate this device�...
Page 7
CAN bus Controller 1: Application 2: Send and receive SMS 3: Real-time diagnostics and visualisation on the PC 4: PROEMION web portal and internet service 3 and 4 can be implemented with concluded ifm CANremote Licence (art� no� ZC00xx)
Page 8
Installation instructions CANremote CR3114 3.1 Overview of the functions ● Integration into a machine network via CAN interface ● Real-time diagnostics via CODESYS programming system ● Data indication and storage via configurable web portal ● Indication and processing of geographical and route data ●...
Page 9
Installation instructions CANremote CR3114 4 Installation 4.1 Fixing the device ► Use screws to fix the device on an even surface� NOTE To prevent any penetration of moisture install the device as illustrated� Position of the connectors: bottom� Mounting variants...
Page 10
Installation instructions CANremote CR3114 4.2 Mounting the antennas ► When mounting the antennas in vehicles avoid the vicinity of fuel tanks, vessels with explosives or insufficiently screened electronic components (→ 2 Safety instructions)� ► Position the antennas so that a permanent distance of min� 0�2 m from people is ensured during operation�...
Page 11
Installation instructions CANremote CR3114 5.2 Operating voltage and CAN interface M12 connector (5 poles) Potential Operating voltage 6���32 V DC Clamp 15 Digital input CAN interface CAN_H CAN_L ► Connect GND of the M12 connector to CAN_GND� NOTE Reverse polarity protection is no longer ensured if the housing is externally grounded�...
Page 12
Installation instructions CANremote CR3114 6 Indicators 6.1 LEDs CR3114 Colour Status Description Green Operational Flashing Preoperational Stopped – Error Flashing Receiving/sending data Green No operating voltage Operating voltage OK – Operating voltage outside the specification (→ 9 Technical data) Green –...
Page 13
Installation instructions CANremote CR3114 Colour Status Description Green GPS function off GPS function active Flashing Finding GPS signal GPS antenna OK GPS antenna fault, e�g� faulty, not or only loosely connected or short circuit 2-colour LEDs (green/red) During the initialisation phase (approx� 5 s) the LEDs do not indicate any defined status� If the colours green and red are activated simultaneously, the colour orange is displayed�...
Page 14
The manuals are available on the internet as PDF files by entering the corresponding article number: www.ifm.com → Data sheet search → Article number → More information Software, function libraries and manuals (as online help): www.ifm.com → Service → Download → Systems for mobile machines*...
Page 15
7.2.1 Software installation ► Install the maintenance tool� ifm maintenance tool - info window ► Install the CANremote AddIn for the ifm maintenance tool� – Start the maintenance tool� – Activate the main menu [Tools] → [Install AddIn...]. – Select the "CANremoteAddIn_vnnnnnn�addin" file�...
Page 16
Installation instructions CANremote CR3114 7.2.2 Connect the unit CANremote Power supply CAN bus Components for the device configuration 1: CANremote CR3114 2: GSM and GPS antenna (e�g� GSM/GPS combined antenna, art� no�: EC2116) 3: Adapter cable for the CAN/PC interface (e�g� art� no�: EC2113) 4: CAN/PC interface (e�g�...
Page 17
Installation instructions CANremote CR3114 7.2.3 Configure the device ► Start the ifm maintenance tool� ► Define the interface� – Right-click on [ecomat mobile] in the "Maintenance Navigation" window section� – Select [Add] in the context menu� – Select [CAN] in the pop-up window –...
Page 19
Installation instructions CANremote CR3114 ► Enter the security parameters� ifm maintenance tool - CANremote AddIn - Security parameters ● Remote access password Is needed for the real-time mode (real-time mode = direct access to the PLC with CODESYS 2�3)� ● SIM PIN PIN number of the SIM card ●...
Page 20
Installation instructions CANremote CR3114 ● GPRS remote server port Default: 60200 ● Online mode handling Restore the data connection after an interruption: 0 = not automatically 1 = automatically ● GSM operator selection mode Mobile network provider selection: 0 = manually 1 = automatically A mobile network provider must be specified with a country-specific "GSM...
Page 21
► Select the country and a mobile network provider from the list� ► Apply with [Select]� ifm maintenance tool - CANremote AddIn - Import GPRS network provider - dialogue window The mobile network provider list is automatically updated via the internet�...
Page 22
Installation instructions CANremote CR3114 7.3 Insert the SIM card NOTE Insert the SIM card after the device has been configured (→ 7.2)� Always disconnect the radio modem before you insert or remove the card� The SIM card and its contacts can be easily damaged by scratching or bending�...
Page 23
Installation instructions CANremote CR3114 ► Insert the SIM card into the cut-out of the card holder� ► Insert the card holder with the SIM card into the slot without much pressure until you feel a stop� When inserting the card, make sure that the SIM card holder is exactly in the guides of the slot and that it is not jammed�...
Page 24
Installation instructions CANremote CR3114 9 Technical data 9.1 CR3114 CR3114 R360/CANremote 3G/GPS Control systems for mobile vehicles 1: LEDs 2: SMA socket, GPS antenna 3: FME connector, GSM antenna 4: M12 connector, 5-pole Made in Germany Product characteristics CAN 3G/GPS radio modem...
Page 25
*) Program / configuration / data Pack quantity [piece] ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — GB — CR3114-00 — 07.01.2015 Seite 2 von 2...
Page 26
Installation instructions CANremote CR3114 10 Maintenance, repair and disposal 10.1 Servicing The device does not contain any components that need to be maintained by the user� 10.2 Cleaning the housing surface ► Clean the device from dirt using a soft, chemically untreated and dry cloth�...