Quick Installation - ViewSonic E70f+ User Manual

Quick Installation

Connect the monitor and
1
computer power cords to a
properly grounded AC outlet.
Connect the video cable from
2
your monitor to your computer.
NOTE: Macintosh users may
need an adapter. (See Customer
Support on page 12.)
3
Turn on your monitor, then your
computer. This sequence (monitor
before computer) is important.
NOTE: Windows 95, 98 or 2000
users may receive a message
asking them to install the INF file.
This is on the CD.
4
Insert the ViewSonic Wizard CD.
NOTE: If you do not have a
CD-ROM drive, contact
ViewSonic Customer Support.
AC wall
outlet
NOTE: If the CD does not auto-
start, double-click the CD icon in
Windows Explorer, then double-
click vswzrd.exe.
Macintosh users: from the
Macintosh desktop, double-click
on the "ViewSonic Wizard"
folder, then double-click on the
"ViewSonic" icon.
5
Follow the on-screen instructions.
Windows users: Set the timing
mode (see Setting up the Timing
Mode on page 5).
To register your product online, go to
the ViewSonic website for your
region. See the Customer Support
table in this guide.
Power cables
VGA video
cable
ViewSonic E70f+ 4