1. Manuals
  2. Brands
  3. Solution Manuals
  4. Stove
  5. SLE42s
  6. Instruction manual

Solution SLE42s Instruction Manual

With etronic 3d flame technology
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual - SLE42s
with etronic 3D flame technology
This product is only suitable for well insulated spaces or occasional use.
To be left with the customer after demonstrating the features of the Solution SLE42s electric fire.
The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions
in this manual must be followed to ensure safe operation of the appliance. It should be noted that the requirements
and this publication may be superseded during the life of the Stove.
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
April 2020 V2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLE42s and is the answer not in the manual?

Questions and answers

Summary of Contents for Solution SLE42s

  • Page 1 This product is only suitable for well insulated spaces or occasional use. To be left with the customer after demonstrating the features of the Solution SLE42s electric fire. The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions in this manual must be followed to ensure safe operation of the appliance.

  • Page 2: Table Of Contents

    Flame Brightness Operation........................Setting the Time and Day (24 Hour Clock)....................Setting the Weekly Timer..........................Thermal Safety Cut-Out..........................Light Emitting Diode............................. Battery Replacement Remote Control...................... Cleaning, Servicing and Maintenance..................... Troubleshooting............................Correct Disposal of this Product........................Solution Fires Warranty..........................Replaceable Parts............................Wiring Diagram.............................

  • Page 3: Important Safety Advice

    Important Safety Advice When using electrical appliances, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:  WARNING: If the appliance is damaged, check immediately with your retailer before installation and operation.
  • Page 4  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given instruction concerning use of the appliance in a safe way or are supervised and understand the hazards involved.

  • Page 5: Installation And Operating Instructions

    Installation and Operating Instructions LOCATING THE UNIT Locating the Unit Fig.1 Before commencing installation of the unit consideration Before commencing installation of the unit consider- ation should be given to the following: should be given to the following: 1. Position in the area to be heated, central locations are Position in the area to be heated, central usually best.

  • Page 6: Technical Data

    Product Dimenions Fig.5 Note: Dimensions stated are in millimetres unless otherwise stated and may be subject to a small tolerance. Technical Data Voltage 220-240V AC ~50-60 Hz Max Power 1700-2000W No Heater Motor Heater Gross Weight (kgs) 45kg Efficiency Rating Commissioning and Handover On completion of the installation: •...
  • Page 7 Technical Parameters Information requirements for electric local space heaters Model identifier(s): SLE42S/HS93383LR Item Symbol Value Unit Item Unit Type of heat input, for electric storage local space Heat output heaters only (select one) manual heat charge control, with [no] Nominal heat output...

  • Page 8: Operational Instructions

    Operational Instructions Fig.6 ! NOTE: The unit can be operated by supplied remote control only. For the unit to operate, the manual ON/OFF switch, located on the leftside of the switch panel must be switched to the “I” position. Behind the screen a red light will illuminate when the fire is plugged in, the wall socket switch is on and the manual on/off switch is on.

  • Page 9: Powering The Fire

    Operation Continued - Remote Control NOTE: The unit may emit a slight, harmless odour and smoke when first used. This odour & smoke is normal and it is caused by the internal heating of the internal heater parts and will not occur again. NOTE: The functions below can be controlled by Remote Control only.

  • Page 10: Flame Operation

    Operation Continued Fig.25 Flame Operation By pressing the Flame Picture button, you can select from four different Flame Picture options -see Fig 25: No Flame Picture FE Flame & Fuel Bed - (Icon is on LCD screen) -E Fuel Bed Only - (Icon is on LCD screen) Flame Only- (Icon is on LCD screen)

  • Page 11: Setting The Time And Day (24 Hour Clock)

    Operation Continued Fig.28 Fig.29 Setting the Time & Day (24 Hour Clock) 1. Press the Power button to turn the unit on. 2. Press & hold the Time Setting button for two seconds to display the time & day see Fig 28 (no numbers shown as time not set).

  • Page 12: Thermal Safety Cut-Out

    Thermal Safety Cut-Out than every two months, isolate the fire from the mains and attach the brush accessory to your vacuum cleaner and gently vacuum the air A thermal safety cut-out is incorporated intakes and outlets. in the heater to prevent damage due to overheating.

  • Page 13: Troubleshooting

    Troubleshooting (IF IN DOUBT isolate the appliance and seek professional advice) The unit does not switch on: • Making sure it is safe to do so, check the mains supply. • Making sure it is safe to do so, check the fuse in the mains supply. •...

  • Page 14: Correct Disposal Of This Product

    Solution Fires will send the appropriate component to maintenance advice in the user instructions rectify the fault, free of charge. Nothing in the warranty shall make Solution Fires liable for any Terms & Conditions or special, incidental or consequential damages, injury to...

  • Page 15: Replaceable Parts

    Exploded View Replaceable Parts Description Part Number Remote Control 2203001 Front Glass 2203011 Side Glass 2203016 Flame Screen 2203020 Blower and Heater Assembly 2203050 Power Supply Board 2203002 Main PCB Board 2203052 Fuel Bed LED 2203044 Flame LED 2203041 Synchronous Motor 2203047 Flame Effect Drum 2203082...

  • Page 16: Wiring Diagram

    Wiring Diagram www.solutionfires.co.uk info@solutionfires.co.uk Capital Fireplaces, Units 12-17 Henlow Trading Est, Henlow, Bedfordshire SG16 6DS...

Table of Contents