Advertisement
d) LED exclusion: for safety reasons and to reduce power consumption disable the LED indication. This is done with dip-switch 4 set to ON.
LEDs remain functional in TEST mode.
e) Temperature compensation: the function consists in the automatic adjustment of the PIR sensitivity when the temperature in the
device exceeds 30°C . this function is enabled by placing dip-switch 6 to ON. In case of exposure to the sun the temperature inside the
appliance can be much higher than the environment temperature.
TECHNICAL FEATURES (see diagrams also)
Power supply: 4.5V via three AA 1.5V 2.2Ah batteries – Current consumption 70uA at rest, 40mA in transmission – Autonomy of about 2
years, which could be greatly reduced in the case of a busy area and with LED active during normal functioning (dip-switch 4).
Functions: indication of movement in the protected area (intruder alarm) – tampering – supervision – flat batteries.
Radio transmissions: coded at 64 bit in simultaneous Dualband frequency – frequencies and power in compliance with the regulations.
Range of about 100 m in free space and without interference on the frequency bands.
Warning! To keep the declared environmental class, it is necessary to tighten properly the screws closing the device !
FRONT VIEW
MOUNTING BRACKET
for
SILENTRON WIRELESS
OUTDOOR DETECTOR
M000060
SUN / RAIN SHIELD
SILENTRON
TAMPER
MAGNET
SILENTRON
MOUNTING
BRACKET
SLIDE
INTO
WASHER
BRACKET
LOCK WASHER
SILENTRON
OUTDOOR
DETECTOR
LOCK WASHER
WASHER
ADJUST FOR
INCLINATION
WALL PLUG
WALL PLUG
ADJUST FOR
INCLINATION
manufacturing and minor inventions
Tel: +27 11 452 4737
Fax: +27 11 452 4738
sales@mami.co.za
M.A.M.I.
21 Hubert Mathew Road
Illiondale
1609
South Africa
Advertisement
