Advertisement
Quick Links
Product Name:
Product Description:
Product Number:
Document Version:
------------------------------------------------------------------------------------------------------------------------
IMPORTANT NOTES ON YOUR SPRING CHANGING TOOL
-
Turbosmart accepts NO responsibility whatsoever for incorrect use of this product which is potentially hazardous and can cause serious
personal injury.
-
Read and understand the instructions for you individual product before attempting to use this tool.
RECOMMENDATIONS
-
Turbosmart recommends that your Products be assembled by an appropriately qualified technician
------------------------------------------------------------------------------------------------------------------------
Please check that the following items have been provided in your Turbosmart Spring Change Tool packaging
Part
1
Turbosmart Spring Changer
4
Turbosmart Sticker
TOOLS REQUIRED
- 12mm spanner/socket and driver
------------------------------------------------------------------------------------------------------------------------
Spring Change Assistance Kit
Spring Change Assistance Kit
TS-0550-3094
V1.00 Rev A
Description
3
1
KIT CONTENTS
Main unit
Turbosmart sticker
Figure 1 - Kit Contents
1
Use
1
2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Turbosmart TS-0550-3094
Summary of Contents for Turbosmart TS-0550-3094
- Page 1 ------------------------------------------------------------------------------------------------------------------------ IMPORTANT NOTES ON YOUR SPRING CHANGING TOOL Turbosmart accepts NO responsibility whatsoever for incorrect use of this product which is potentially hazardous and can cause serious personal injury. Read and understand the instructions for you individual product before attempting to use this tool.
- Page 2 ABOUT YOUR SPRING CHANGER The Spring changing tool by Turbosmart is designed to be compatible with most Turbosmart products that requires changing the springs for tuning purposes, quick release pins allow quick height adjustments to suit smaller or larger products Benefits include: •...
- Page 3 FITTING YOUR KOMPACT SERIES BOV Mounting the Spring Changer Set Part and Compress Cap The base plate of the spring changer has four holes to be used for mounting to a solid workbench for the best rigidity. Set part on the concentric base, the different levels of the base The spring changer can also be held in a vice by the upright in a will hold the part centred with the compression screw.
- Page 4 Release Spring Tension Once the fixture has been released from the cap hold the cap of the product and start unwinding the compression screw holding your hand in a way that prevents ejection of the spring out the side. Once the spring tension has been released, change the spring to your desired configuration and reverse the steps ensuring the cap is aligned correctly on the product during compression.
Need help?
Do you have a question about the TS-0550-3094 and is the answer not in the manual?
Questions and answers