Do you have a question about the GS700 and is the answer not in the manual?
Questions and answers
Chris Kaseeska
January 28, 2025
I have used my steamer twice took it out to use and does not work Triedto troubleshoot and still does not work Very disappointed in this product any suggestions?
1 comments:
Mr. Anderson
February 10, 2025
If the Light 'n' Easy GS700 steamer does not work after limited use, try these troubleshooting steps:
1. Unplug the appliance from the electrical outlet. 2. Let the appliance cool completely for approximately 30 minutes. 3. Check the water tank and ensure it has water. If empty, refill with water only (no chemicals or cleaning solutions). 4. Inspect the power cord for any damage and ensure it is properly connected. 5. Ensure the steam nozzle is not blocked by any objects or debris. 6. Do not operate the unit with wet hands and avoid using it on the same circuit as another appliance to prevent circuit overload. 7. Try a different electrical outlet to rule out socket issues. 8. If the problem persists, contact customer service for further assistance.
Always follow the manual's safety instructions when troubleshooting.
This answer is automatically generated
Summary of Contents for Light 'n' Easy GS700
Page 1
XIAO TIAN (ZHONGSHAN)INDUSTRIAL CO., LTD. Thank you very much for purchasing your new steam mop, please be sure to read the instructions carefully before using. MADE IN CHINA Please keep this manual for easy reference. Any questions call customer service 1-844-798-2632...
Page 2
BASIC SAFETY PRECUATIONS SHOULD ALWAYS BE FOLLOWED WHEN USING THE STEAM CLEANER & GARMENT STEAMER READ ALL INSTRUCTIONS BEFORE USAGE. 1. Do not use outdoors. 2. Do not leave the appliance unattended when plugged in. Always unplug the power cord from the electrical outlet when not in use and before servicing.
Page 3
Attachments 3. Attach the top of the brush connection to the unit into the notch. 4. Next, secure the pointed end of the brush connection around the bottom of the unit and snap into place ( Fig. 1) 5. To remove the brush connection, gently pull on the pointed end and lift the brush connection off the unit.
Page 4
Filling the water tank 1.Connect to the power, the indicator light is on, flashing in red. 8. Disconnect the power cord before filling the water tank . 2.Wait 20 seconds to heat, press the button, the red indicator light is 9.
Page 5
1.Unplug the appliance from the electrical outlet. 2.Let the appliance cool completely for approximately 30 minutes. 3.Empty the water from the water tank . 4.Wipe the exterior of the garment steamer with a damp cloth and wipe GS700 120V 60Hz 800W dr y if needed.
Page 6
One Year Limited Warranty Thank you for your purchase! Verify that the light on the unit is lit. If not, The steamer is check that the unit is plugged in. There is not not turned on. WARRANTY: enough water in the unit. Enjoy awarranty for the steam cleaner for 1 year.
Need help?
Do you have a question about the GS700 and is the answer not in the manual?
Questions and answers
I have used my steamer twice took it out to use and does not work Triedto troubleshoot and still does not work Very disappointed in this product any suggestions?
If the Light 'n' Easy GS700 steamer does not work after limited use, try these troubleshooting steps:
1. Unplug the appliance from the electrical outlet.
2. Let the appliance cool completely for approximately 30 minutes.
3. Check the water tank and ensure it has water. If empty, refill with water only (no chemicals or cleaning solutions).
4. Inspect the power cord for any damage and ensure it is properly connected.
5. Ensure the steam nozzle is not blocked by any objects or debris.
6. Do not operate the unit with wet hands and avoid using it on the same circuit as another appliance to prevent circuit overload.
7. Try a different electrical outlet to rule out socket issues.
8. If the problem persists, contact customer service for further assistance.
Always follow the manual's safety instructions when troubleshooting.
This answer is automatically generated