Advertisement
Available languages
Available languages
Manual
WR 250 HS
AMP 250 DSP
Applicable for
113-250-00-100-00
113-250-00-200-00
Specifications
Power Supply
Music Power
50 W @ 4 ohms / 30W @ 8 ohms
Speaker Impedance
Protocols
Airplay, UPnP, DLNA
W-LAN(b/g/n), LAN (100Mbit),
Connections
Dimensions (H/W/D)
106 x 90 x 58 mm / 6 TE
Weight
Operating Temperature
Specifications
Power Supply
Music Power
50 W @ 4 Ohm / 30W @ 8 Ohm
Speaker Impedance
Dimensions (H/W/D)
106 x 90 x 58 mm / 6 TE
Weight
Operating Temperature
Product registration and extended warranty at:
www.whd.de/Produktregistrierung
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD.
Operation
Thank you for buying our DIN rail amplifier (with WiFi receiver) and DSP function.
Please read this manual carefully, especially the safety and security information.
Mounting and connections
- Install the cables (power supply, speaker cabel, CAT5/7 Cable/Patchcord) for the WR 250
HS according to installation guidelines, and your desired port scenario.
- Mount the WR 250 HS on your DIN Rail system.
! Mount the device only in locations that ensure sufficient temperature dissipation.
Connections
Connecting cables according to the printing. After connecting power supply, the device is
ready for operation.
! LineIn is for a local audio source at the AMP 250 DSP / WR 250 HS zone.
WR 250 HS
24 V DC / 5 A
4...8 ohms
Bluetooth 4.0
0,4 kg
0 °C ... +30 °C
In addition to this guidance please comply with your own country-specific safety & security
AMP 250 DSP
regulations.
24 V DC / 5 A
The device is not suitable for outdoor operation.
- The electrical supply must be disconnected before working on the device.
- Keep the original packaging (for returning products under warranty).
4...8 ohms
- Protect the device from falling or splashing water. Make sure, as with all electronic prod-
ucts that no liquids can access any part of the system.
- Do not expose the device to temperatures above 30° C.
0,4 kg
- Do not expose the device to electrostatic discharges.
0 °C ... +30 °C
! Please note the country-specific safety guidelines for use and operation of W/LANs.
! For continued flawless audio transmission you should always use a wireless router from
802.11n and the latest smartphones / tablets.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
1 ... Remote Control
Speaker
2 ... LineIn
3 ... LineIn sesitivity
Max. per output L/R
4 ... WPS/Reset button
1x 4 speaker
5 ... Status LED
2x 8 speaker ||
6 ... Speaker OUT
5x 20 speaker ||
7 ... Ethernet / RJ45
8 ... DSP Setting
9 ... Power Supply
Safety & Security Informations
Improper handling may void warranty!
Status LED
GREEN
RED, bright
RED, blinking
BLUE, brilliant
BLUE, blinking
Notes on function
1. WLAN / LAN operation:
If the RJ45 (LAN) cable is connected, the Wi-Fi
function turns off automatically.
2. KNX operation:
For this use an optional KNX gateway is neces-
sary. Thus all WHD W/LAN components can be
controlled via KNX and e.g. Internet radio sta-
tions can be selected, which can be played di-
rectly with the WR 250 HS, without requiring
the use of a smartphone or tablet.
WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Tel. Zentrale +49 74 20 / 8 89-0
Fax Zentrale +49 74 20 / 8 89-51
Version
(Technical and optical
modifications reserved)
04.09.2019
- page 1 -
Status
Ready for operation
Connectable with
WLAN / Direct Play
Not connectable
(possibly restart or
RESET)
Connected to Wi-Fi,
ready to receive
Boot process (about 30
seconds) or firmware
update (about 2 minu-
tes)
E-Mail:
info@whd.de
Web:
www.whd.de
Advertisement
