Summary of Contents for Schacht LOOM BENCH
- Page 1 LOOM BENCH ssembly nstructIons Loom Bench Shown with Optional Bench Bags Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 p. 303.442.3212 f. 303.447.9273 © 2011 Schacht Spindle Company, Inc. 04.11...
- Page 2 LOOM BENCH ssembly nstructIons HARDWARE REQUIRED TOOLS 4 – 3-1/4" x 1/4" carriage bolts 1/2" wrench 8 – 1/4" flat washers 7/16" wrench 4 – 1/4" lock washers Phillips screwdriver 4 – 1/4" hex nuts Flat screwdriver 4 – 2" x 1/4" truss head machine...
- Page 3 Place the bench seats on top of ASSEMBLY the bench seat supports. Be sure that Before assembling the bench, the countersunk holes are facing up, decide whether you want your bench and the rounded corners are on the seat in a slanted or flat position. For outside.
- Page 4 Line up the holes in the wood Gently tap the steel rods into the bench bag end with the steel rods. holes in the ends of your Schacht Use the scrap wood as protection bench seat. Place a scrap of wood be-...
Need help?
Do you have a question about the LOOM BENCH and is the answer not in the manual?
Questions and answers