Table of Contents
Advertisement
5.
Never wrap the cord tightly around the appliance, as this could place undue stress
on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT
During the first few minutes of initial use, you may notice smoke and/or a slight odor.
This is normal and should quickly disappear. It will not recur after appliance has been
used a few more times.
1.
Carefully unpack the personal blender and all parts. Remove all packaging materials,
including any stickers or labels.
2.
Wash the travel cup, lid and blade in warm soapy water. DO NOT IMMERSE THE
BASE (MOTOR HOUSING) IN WATER.
3.
Care should be taken when cleaning the blades, as the blades are sharp.
4.
Position the personal blender base on a dry, level, heat-resistant surface and
assemble according to instructions.
5.
It is recommended to operate this appliance on a separate outlet and circuit from
other appliances to avoid overloading the circuit.
SPECIAL INSTRUCTIONS:
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
WARNING: ALWAYS unplug the personal blender before assembling, disassembling,
cleaning or storing.
1.
Position the base on a dry, flat and level surface.
2.
Insert plug into wall outlet.
3.
Fill the cup with contents you wish to blend, but do not overload: Attach lid.
4.
Align the unlock icon over the arrow on the base and place the cup onto the base.
Turn the cup counterclockwise until the lock icon is aligned with the arrow on the
base and the cup locks into position. The personal blender will not operate unless
the cup is properly locked into place.
5.
Press and hold the Pulse Button to blend ingredients. Release and repeat until
desired blending results are achieved. When you release the Pulse Button, the
personal blender will turn off and the blender will stop operating.
6.
Wait until the blades stop completely before removing the cup.
7.
Unplug from outlet when not in use.
4
BEFORE USING
HOW TO USE
Advertisement
Table of Contents
