Premium Poly Patios Amish Poly Van Buren Sofa WV-992-P Assembly Instructions

Tools Needed: hammer, 7/16" wrench, #2 square bit screw driver or power driver, punch
No drilling is required. All the necessary holes are predrilled. Bolts fit snugly in the holes. You may
need to use a hammer to drive the bolts through the holes.
Hardware List for Chair: forty-six 2" screws
Hardware List for Love Seat: fifty-eight 2" screws Hardware List for Love Seat: fifty-eight 2" screws
Hardware List for Sofa: seventy 2" screws Hardware List for Sofa: seventy 2" screws

Parts

Parts
4 Back Rails 4 Back Rails
4 Seat Slats
Skirt Board Skirt Board
2 Arm Assemblies
Lay a side assembly on a protected surface such as
cardboard or blankets.
Step 1 — Install Back Rails
2" Screws, Back Rails
Secure the back rails using two 2" screws in each rail us-
ing the pilot holes. Set the assembly upright and secure
the other side assembly in the same way.
Premium Poly Patios
Assembly Instructions
Mission and Van Buren Deep Seating
Hardware
2 Side Assemblies 2 Side Assemblies
www.Poly-Lumber-Furniture.com
Step 2 — Install the Skirt Board
2" Screws, Skirt Board
Use 2" screws in the pilot holes of the front skirt board
to secure it to the side assemblies.
Step 3 — For Love Seat and Sofa Only
2" Screws, Center Leg Assembly
Position each leg with 20¼" (20" for sofa) in between
the two legs. Measure the top and bottom of the leg to
make certain the leg is straight. Secure with 2" screws
in pilot holes in leg assembly and back slats.
Toll Free - 1-877-904-1234