DS Services of America pure water dispenser 200k Series How To Clean

DIY: HOW TO CLEAN
YOUR WATER DISPENSER
Your water dispenser exterior should be thoroughly cleaned at least twice a year,
and your CrystalFlo water cartridge replaced every 12 months. If you do not have
a replacement cartridge handy, you can order one
directly to you.
Before you start cleaning, wash your hands thoroughly with soap and water for at least 20 seconds.
TIP: The best time to replace your water cartridge and clean your dispenser
is when the existing water bottle is empty.
WHAT YOU'LL NEED:
• CrystalFlo replacement cartridge
• 70% rubbing alcohol or disinfecting wipes
• Clean cloth or soft brush
• Disposable non-latex gloves
WARNING: Always use caution when handling hot water.
Fig 1
1. Turn off the hot tank heater switch
on the back of the dispenser and
unplug your unit (Fig 1). Let the unit
stand for one hour before cleaning
to allow the hot tank to cool.
4. Pull CrystalFlo water cartridge upward to remove (Fig 4). Do not squeeze
the water reservoir as water could leak out.
TIP: Have a bucket nearby to dispose of the used
CrystalFlo cartridge, which will contain water.
here and it will be delivered
• Bucket
• Heat-resistant container to fit under spigots
• Towels to absorb any water spills
Fig 2
2. Place a glass or other container
below the water faucets to catch
any drips (Fig 2).
Fig 3
3. Wearing gloves, press the cover lock
on the top rim of the cooler and pull
up to open (Fig 3).
Fig 4
®