Advertisement
Quick Links
Check Firmware Version & Update Procedure
Checking the firmware version
Before starting a firmware update, check the firmware version of
the DAC-HA300 that you are using.
1.
Turn on the unit.
2.
Use the multiway button to select "SETTINGS", and
then press the multiway button.
The "SETTINGS" menu will open.
3.
Use the multiway button to select "OTHERS", and then
press the multiway button.
The "OTHERS" submenu will open.
4.
Use the multiway button to move the cursor down
and show the "ABOUT" item. "VER x.x.x" shows the
current firmware version.
Version number are shown in the following manner.
"VER 1.0.0" is version 1.00.
DAC-HA300
Firmware update procedures
Precaution before updating
When conducting a firmware update, be sure that remaining
battery power is sufficient or that power is being supplied by the
included DC power supply cable.
The unit will not allow updating if the remaining battery power is
low.
Please read the update instructions carefully before beginning.
Advertisement
Related Manuals for Onkyo DAC-HA300
Summary of Contents for Onkyo DAC-HA300
- Page 1 Before starting a firmware update, check the firmware version of Precaution before updating the DAC-HA300 that you are using. When conducting a firmware update, be sure that remaining battery power is sufficient or that power is being supplied by the Turn on the unit.
- Page 2 1. Download the file and decompress it. This screen shows a list of firmware update files in the Download the latest version of the firmware from ONKYO “UTILITY” folder on the unit. The firmware copied in website by your OC If the downloaded file is in ZIP format or step 2 above should also be shown.
Need help?
Do you have a question about the DAC-HA300 and is the answer not in the manual?
Questions and answers