Front Runner RRAC099 Installation Instructions Manual

front runner
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
If you would like to mount your Light Bar under your Rack, refer to Section 3 and 4. You will need a minimum of 100mm
clearance between the bottom of the Rack and the vehicle's roof in order to fit the LED Light Bar and Cover.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
RRAC099_REV_A04
READ ME !
Thank you for purchasing a Front Runner 40" LED Light Bar Bracket.
Refer to Page 2 for a list of all the components, quantities and tools required.
If you would like to mount your Light Bar in front of your Rack, refer to Section 1 and 2.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
LED 40" Light Bar
Brackets
1
RRAC099
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
ENG