Advertisement
Table of Contents
- 1 Component Parts
- 2 Step 1: Disassemble the Adapter Using the Supplied 2.5Mm allen Wrench as Shown.
- 3 Step 2: Using the 2.5Mm allen Wrench, Remove the 4 Top Screws from the Agitator Assembly.
- 4 Step 4: Using a 3Mm allen Wrench, Attach the Housing Cap Using the 4 Socket Head Cap Screws.
- 5 Step 5: Using a 2.5Mm allen Wrench, Slide the Shaft Adapter over the Pin and Tighten.
- Download this manual
Completed Assembly
Part No. CLS-1380-SAR1
Component Parts
1
2
3
4
5
6
7
Contact Us
T 1.800.843.1794
tech@cglifesciences.com www.cglifesciences.com
Trademarks are the property of their respective owners. Printed in USA. CG-20040IH0420
Agitator Top Adapter Plate
Socket-Head Cap Screws
Shaft Adapter
Set Screws
Agitator Housing Cap
Agitator Spline Gear
Flat-Head Cap Screws
F 1.800.922.4361
Assembly Instructions
for Applikon
Agitator to
®
Sartorius
Motor Adapter
®
Part No. CLS-1380-SAR1
Contact Us
T 1.800.843.1794
F 1.800.922.4361
tech@cglifesciences.com www.cglifesciences.com
Advertisement
Table of Contents
Summary of Contents for Chemglass CLS-1380-SAR1
- Page 1 Assembly Instructions for Applikon Agitator to ® Completed Assembly Sartorius Motor Adapter ® Part No. CLS-1380-SAR1 Part No. CLS-1380-SAR1 Component Parts Agitator Top Adapter Plate Socket-Head Cap Screws Shaft Adapter Set Screws Agitator Housing Cap Agitator Spline Gear Flat-Head Cap Screws...
- Page 2 Step 5: Using a 2.5mm Allen wrench, slide the Adapter comes partially assembled as shaft adapter over the pin and tighten. shown at left. Step 1: Disassemble the adapter using the Step 6: Using a 2.5mm Allen wrench, attach supplied 2.5mm Allen wrench as shown. the housing cap to the lower plate using the enclosed screws.
Need help?
Do you have a question about the CLS-1380-SAR1 and is the answer not in the manual?
Questions and answers