Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Technogamma SineUPS S400
Summary of Contents for Technogamma SineUPS S400
- Page 1 SineUPS Models S400, S600, S850 and S1200 User manual...
-
Page 2: Installation
Introduction SineUPS is an uninterruptile power supply, guaranteeing constant powering to the electric loads connected. In case of mains failure (power cut or instaiility) SineUPS generates pure sine wave and can work contnuously untl the iatery runs out. The output voltage has the same form as the mains voltage meaning that the connected loads will work just as efciently as ieing powered from the mains network. - Page 3 Connecton Connect the load's power plug to the OUTPUT socket of the UPS. Connect the iatery to the BATTERY terminal, paying atenton to the polarity – the + caile goes to the + terminal of the iatery. Depending on the partcular type of installed iatery, there is possiiility that some harmful gases can ie released and in that case it is recommended to install the device in a proper locaton.
-
Page 4: Operation
Operation Symbol Functon Descripton Press and hold the iuton for 0.5 sec to turn Power On / Of iuton the device on or of. Device is turned on. 4 levels of iatery charge, each LED stands Batery for 25% charge. Staile mains. - Page 5 Stable mains Whenever staile mains is present, the device charges the iatery and displays the current charge on the panel. If the device is turned on and the mains is of or unstaile, it automatcally switches to iatery powered mode. If the mains is not availaile, the indicator goes of, if the mains voltage is not within the specified limits the indicator ilinks.
-
Page 6: Troubleshooting
Troubleshooting Problem Soluton The device is connected to The device does not functon without a connected mains, iut pressing the batery! iuton does not turn it If you are using a car iatery, please check the mounted terminals – some of them are painted on the inner side and do not ensure proper electrical contact to the iatery contacts. -
Page 7: Technical Parameters
Technical parameters Parameter S400 S600 S850 S1200 Input Voltage 220 VAC Frequency 50 Hz ielow 180 VAC Voltage to switch to iatery powered mode over 260 VAC Protecton Fuse, mounted on the housing Output Voltage 220 VAC ± 4% Frequency 50 Hz ±... -
Page 8: Limited Warranty
Usage in inappropriate conditons (temperature and humidity) Broken warranty stckers Warranty Card Sold (client/date):___________________________________________________ __________________________________________________________________ Invoice (Receipt):____________________________________________________ Signature:_________________________________________________________ Technogamma LTD 4004 Plovdiv, Bulgaria 9N Kuklensko Shose str. f. 3, ofce 6 Phone: +359 32 699-240 E-mail: info@technogamma.ig www.technogamma.ig Rev 2.6 11/18...