Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Technogamma SineUPS Series
Summary of Contents for Technogamma SineUPS Series
- Page 1 SineUPS Models S100a, S100a+, S100 and S200 User manual...
-
Page 2: Installation
Introduction SineUPS is an uninterruptible power supply, guaranteeing constant powering to the electric loads connected. In case of mains failure (power cut or instability) SineUPS generates pure sine wave and can work continuously until the battery runs out. The output voltage has the same form as the mains voltage meaning that the connected loads will work just as efficiently as being powered from the mains network. - Page 3 Connection Connect the load's power plug to the OUTPUT socket of the UPS. For models S100 and S200 an external battery has to be connected (models S100a and S100a+ have integrated battery, so skip this step, as S100a+ has an option for connecting external battery so the step is not mandatory).
-
Page 4: Operation
Operation Symbol Function Description Press and hold the button for 0.5 sec to turn Power On / Off button the device on or off. Device is turned on. 4 levels of battery charge, each LED stands Battery for 25% charge. Stable mains. -
Page 5: Battery Power
Stable mains Whenever stable mains is present, the device charges the battery and displays the current charge on the panel. If the device is turned on and the mains is off or unstable, it automatically switches to battery powered mode. If the mains is not available, the indicator goes off, if the mains voltage is not within the specified limits the indicator blinks. -
Page 6: Troubleshooting
Troubleshooting Problem Solution The device does not function without a connected battery! If you are using a car battery, please check the The device is connected to mounted terminals – some of them are painted on the mains, but pressing the inner side and do not ensure proper electrical contact to button does not turn it... -
Page 7: Technical Parameters
Technical parameters Parameter S100a S100a+ S100 S200 Input Voltage 220 VAC Frequency 50 Hz Voltage to switch to below 180 VAC battery powered over 260 VAC mode Protection Fuse, mounted on the housing Output Voltage 220 VAC ± 4% Frequency 50 Hz ±... -
Page 8: Limited Warranty
Usage in inappropriate conditions (temperature and humidity) Broken warranty stickers Warranty Card Sold (client/date):___________________________________________________ __________________________________________________________________ Invoice (Receipt):____________________________________________________ Signature:_________________________________________________________ Technogamma LTD 4004 Plovdiv, Bulgaria 9N Kuklensko Shose str. fl. 3, office 6 Phone: +359 32 699-240 E-mail: info@technogamma.bg www.technogamma.bg Rev 2.5 01/16...
Need help?
Do you have a question about the SineUPS Series and is the answer not in the manual?
Questions and answers