Download Print this page
DigiTech WAM4045 User Manual

DigiTech WAM4045 User Manual

Receiver

Advertisement

Quick Links

An easy to use UHF Wireless Microphone system perfect for a number of applications. The receiver,
rechargeable via USB, is a compact sized case with a 6.5mm jack that connects directly to an input of a
mixer or amplifier. The unidirectional Lapel Microphone with 1.2m cable connects to a small transmitter that
clips onto your waist or fits into your pocket. The transmitter has a volume control and is also rechargeable
by USB. The systems effective range is 50m on average, making it ideal for street announcers/performers,
pubs, club functions, etc.
• Up to 50m Range
• Rechargeable
Frequency Response:
UHF Frequency Range:
Transmission Range:
Maximum Radiant Power: 13dBm
Operating Time:
Charging Time:
Battery Tx:
Battery Rx:
Receiver:
Transmitter:
Plug the receiver into the Mic jack, turn on the audio device. Turn on the receiver and transmitter, plug the
lapel mic into the transmitter.
Step1: Plug the receiver into your Mic jack, and turn on your audio device.
Step2: Turn on the receiver and short press the pair button, at this time you should find the blue indicator
flashes on the receiver.
Step3: Plug the lapel mic into the transmitter. Turn on the transmitter and long press the "Pair" key for
about 3 seconds, then you should find the blue indicator lights on the receiver become constant
blue. It means that the receiver and transmitter are paired successfully.
No sound: The indicator lights are not being on: Please charge the receiver.
The indicator light of transmitter shows low: Please charge the transmitter.
Distinct howling: Please do not point the microphone toward the speaker and the distance between
microphone and speaker should be about 3M.
Please turn down the volume to avoid howling in a small room.
Introduction
Specifications
30Hz-20kHz
700-730MHz
Up to 50m
8~10 hours (@ 50% volume)
3~4 hours
18650 Lithium 3.7V 1500mA
3.7V 750mA
105(L)x36(W)x19(D)mm, 45g
85(L)x56(W)x27(D)mm, 92g
How to Use
UHF Manual Pairing
Troubleshooting
Wireless Microphone & Receiver
Features
User Manual

Advertisement

loading

Summary of Contents for DigiTech WAM4045

  • Page 1 Wireless Microphone & Receiver User Manual Introduction An easy to use UHF Wireless Microphone system perfect for a number of applications. The receiver, rechargeable via USB, is a compact sized case with a 6.5mm jack that connects directly to an input of a mixer or amplifier.
  • Page 2 Transmitter & Receiver Operation Turn on/off: Insert the wired microphone into the “MIC” input port of waist hanging UHF wireless transmitter; Push the switch to “On” to turn on the UHF wireless transmitter and the battery level indicator will on. Push the switch to “OFF”...
  • Page 3 Power on/off: Press “ ” for 3s and it’s powered on with green indicator light being on all the time. Press “ ” 3s again and it’s powered off with green indicator light going out. 5VDC charging port: Please switch off the receiver before charging. Use the charger with DC 5V output connects with Mini-USB cable to charge the receiver.