Page 2
If exhaust duct is to be located on a cabinet ganged adjacent to another cabinet, trim excess foam seal from ends of top collar assembly as shown (ends of foam seals are pre-scored). Trim Seals Here For Technical Support: www.panduit.com/resources/install_maintain.asp Page 2 of 4...
Page 3
(4) #12-24 Hex Nuts (use 5/16” socket (use 7/16” end wrench) wrench) Clamping Features (2) #12-24 Hex Nuts (detail view) (use 7/16” end wrench) SOME COMPONENTS REMOVED FROM VIEW TO ADD CLARITY For Technical Support: www.panduit.com/resources/install_maintain.asp Page 3 of 4...
Page 4
- Remove nuts to install ganging bracket (use 7/16” socket wrench or end wrench) VIEW SHOWS UNDERSIDE OF END SEAL BRACKET For Instructions in Local Languages E-mail: and Technical Support: cs@panduit.com Fax: www.panduit.com/resources/install_maintain.asp (708)444-6448 www.panduit.com Page 4 of 4...