Tape Section; Inserting The Tape; Removing The Tape; Fast Forwarding/Rewinding Of The Tape - Verona CR 43 Operation Instructions Manual

The set either samples the stations of
storage levels I-III or of the Travelstore
level "T". This depends on the current
switching status.
If a preset button has no station alloca-
ted, this button is skipped.
To terminate this function:
Press the PS rocker switch ? once
again.
The station currently sampled is
maintained.
20

Tape Section

Inserting the Tape

If you wish to play a cassette tape:
switch the set on
gently insert the cassette with side 1
upwards.
The tape will then be played in the direction
it was last played.
Track indication 6 indicates which side is
played.
- side A or 1 is played.
- side B or 2 is played (reverse operation).

Removing the Tape

If you wish to remove the tape:
button 4. The tape is
press the
then ejected.
Fast Forwarding/Rewinding of
the Tape
Fast Forward
Press the FF (Fast Forward) button 9.
At the end of the tape the set will switch to
the other side and resume playing the
tape.
Stopping the Fast Forward Operation
Press the FR button 7.
Fast Rewind
Press the FR (Fast Rewind) button 7.
Once the tape has been completely
rewound, the set begins playing the
tape.
Stopping the Fast Rewind Operation
Press the FF button 9.

Autoreverse

If, while a tape is playing, you wish to switch
to the other side of that tape:
press the FF and FR buttons simulta-
neously.
At the end of the tape the set will automatical-
ly switch to the other side of the tape.
Note:
When playing stiff tapes it is also possible to
manually switch to the other side of the tape.
If this is the case, check the tape wound up to
that point; fast forwarding or rewinding often
helps in such cases.