Advertisement
Quick Links
D
Originalbetriebsanleitung ......................3 - 11
GB
Original Instructions..............................12 - 20
F
Notice originale ................................21 - 29
NL
Oorspronkelijke gebruiksaanwijzing......30 - 38
TR
Kullanıcı Talimatları.............................39 - 47
Automix 1801
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for EIBENSTOCK Automix 1801
- Page 1 Originalbetriebsanleitung ..……...…..3 - 11 Original Instructions...…….....12 - 20 Notice originale ………….……...……….21 - 29 Oorspronkelijke gebruiksaanwijzing…...30 - 38 Kullanıcı Talimatları...……....39 - 47 Automix 1801...
-
Page 2: Important Safety Instructions
ENGLISH Important Safety Instructions Important instructions and warning notices are allegorized on the machine by means of symbols: Before you start working, read the operating instructions of the machine. Work concentrated and carefully. Keep your workplace clean and avoid dangerous situations. - Page 3 Intended Use The Automix 1801 tool is intended be used to prepare and mix ready- mixed plaster, mortar and concrete as well as gypsum, lime and other building materials of medium to high viscosity and a maximum quantity of 50 kg.
- Page 4 Safety Instructions Safe use of the tool is only possible if the user had studied the instruction manual and safety instructions completely and is strictly following the instructions contained therein. Additionally, the general safety instructions of the leaflet supplied with the tool must be observed. Prior to the first use, the user should absolve a practical training.
- Page 5 Tool Assembly Take the protective grid, stand with bucket, protective shield, draw bar, stirrer basket and accessories plastic bag out of the cardboard box. Fix the protective grid on the bucket and place the draw bar. Fix the three components by means of the fixing bolt.
- Page 6 Readjustment of the machine holder The Automix 1801 is preset at the factory to the optimal position of the stirring rods in the bucket. This position can be readjusted as follows: Loosen the hexagon nut with a jaw wrench size 17.
- Page 7 Tool Protection Inadequate use may result in damages. Therefore, it is strictly required to observe the following instructions: Use only stirring baskets recommended by the manufacturer. Do not stress the tool to such a extend that it stops by itself. In order to protect user and motor, the Automix is equipped with a mechanical overload protection.
- Page 8 Cement The stirrer is well suited to mix ready-mixed mortar, plaster and the like. Automix is not designed to mix concrete or mortar with medium-size gravel and admixtures. To prepare ready-mixed mortar or plaster, process as described in section ‘Floor and Wall Tile Adhesives’ above. Since mortar is heavily hygroscopic, in view of excessive mix hardening it is necessary to carefully observe the quantities of adhesive, cement or additives for the desired mix.
-
Page 9: Environmental Protection
Always keep the power tool and the ventilation slots clean. During work, please pay attention that no particles get inside the machine. In case of failure, a repair has to be carried out by an authorised service workshop. Environmental Protection Raw material recycling instead of waste disposal To avoid damages on transportation, the power tool has to be delivered in a sturdy packing. - Page 10 Complaints will be accepted only if the tool is returned in non-dismantled condition to the manufacturer or an authorized Eibenstock service centre. Declaration of Conformity We declare under our sole responsibility that the product described under “Technical Data”...
Need help?
Do you have a question about the Automix 1801 and is the answer not in the manual?
Questions and answers