PLAMERE (MODEL : GPM-1000) INSTRUCTION MANUAL For safe use, please read this manual carefully. Use it correctly according to the contents described. Keep this book for future to use to transferring this Product to another person, please be sure to deliver it together.
INSTRUCTION ■ Pulse Mode High Frequency Lifting •Support pulse mode of 500Hz as well as continuous mode. •High Frequency by pulse mode which LIFTING optimized for lifting promotes collagen synthesis and wrinkles. PULSE MODE 500Hz ■ Base-offer High Frequency permeating tips and fractional tips for cosmetic applications •40kHz Continuous mode permeating tips with electroporation effect.
CAUTION ⚫ Do not use or leave it near fire, pay attention of the risk of volatile gas ignition. ⚫ Do not disassemble or modify the product. ⚫ Do not touch or handle the body and charger with wet hands. ⚫...
Page 4
CAUTION : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PRODUCT COMPOSITION 1. Body 2. Charging Cable 3. Lifting Tip 4. Permeating Tip 5. Fractional Tip 6. Tip Collets ■ Components name & Function 1. Body : Main body for High Frequency Output. To applied various tips, the 3Ø standard collet has set up as base. 2.
Page 6
DESIGNATION BODY ➒ ❽ ❻ ❺ ❼ ❹ ❸ ❷ ➓ ❶ Collet : A part for inserting the needle tip as 3Ф standard size. ❶ ❷ Head Cap : Cap for fixing needle tip. ❸ Output Indicator : Indicates the state of output. ❹...
Lifting for Wrinkle Improvement HOW TO USE - PART 1 : and Collagen Regeneration Tip Installation Rotate the head cap counterclockwise to loosen it slightly, insert the lifting tip into the collet, and turn the head cap clockwise to secure the tip to the collet. Lifting Tip Head Cap Procedure...
Page 8
Permeating Tip for Cosmeti Absorbent + HOW TO USE - PART 2 : Fractional Tip ■ Tip installation is same as Lifting tip installation. The procedure, it takes 15minutes as shown below. Tapping by Fractional Tip – 5min After installing the fractional tip first, clean the treatment are and remove the water , Set the continuous(C) mode and the output intensity to 3~5, then move the tip and tapping lightly.
HOW TO CHARGE ■ Connecting Micro USB •Charging starts when you Connect micro USB cable to the USB terminal of pc or notebook or connecting micro USB cable of the micro USB type mobile phone charger to the charging terminal of the main body. Charging Terminal Micro USB Cable CAUTION...
Need help?
Do you have a question about the PLAMERE GPM-1000 and is the answer not in the manual?
Questions and answers