Guarantee Conditions; General Information - Venso Grow light Duo 3E Manual

Guarantee conditions

Thank you for choosing an EcoSolutions product. These products are developed for us by Parus in
Korea. They are carefully tested and inspected to ensure correct function and operation.
Guarantee conditions
Your product is covered by a 2-year guarantee. The guarantee is valid from the date of purchase as
shown on your receipt. To make a guarantee claim, please contact the reseller from whom you purchased
the product.
Exception from the guarantee commitment
The guarantee will be invalided in any of the following events:
·
if the product has been connected to a dimmer
·
if the product has been connected to the wrong voltage or to a dimmer control device
·
if the product has been used outside the recommended temperature range
·
if the product has been subjected to mechanical damage, e.g. dropped on a concrete floor
·
if the product has been dismantled for troubleshooting/repairs
Read the user instructions before using the product. Save the instructions for future reference.
Safety instructions
Before using the light, read and follow these instructions:
·
The light is NOT intended for outdoor use
·
temperature range -20°C – +40°C
·
never install the light in a wet or moist luminaire
·
make sure your hands are dry during installation
·
never use the light in a sealed compartment; always allow air to circulate around it
·
do not connect the light to a dimmer
·
do not look directly at the light when it is on
·
take care when connecting the light to avoid electric shocks
·
the light's heat sinks will become hot (35–50°C) during use
·
All electrical installation work required to install the light must be performed by a qualified professional
·
do not use the light if it fails to light up, starts blinking or emits a weak light
·
In the event of malfunction, switch off the unit immediately. Never try to repair the light yourself, since
this could cause serious damage and invalidate the guarantee

General information

Many indoor plants come from parts of the world where the daytime hours and light conditions are very
different to our own. Growing indoors therefore places particularly high demands on the lighting. With
the right light source, you can grow herbs and plants indoors and additionally enhance comfort for us
humans.
Technical function
The product consists of a light source (LED) with wavelengths that are optimised to boost plants' health
and growth.
Installation and assembly
Assemble the product according to instructions on the next page. Connect the power supply to the device
and plug the power cord into an outlet or a timer. Use a timer to set the time, 12-16 hours for cultivation.
Placing the product
The product should be placed on a suitable location indoors with a temperature between 16 and 26
degrees. The ideal environment is a temperature of 18 - 24 degrees, with a humidity of 50% and good air
circulation.
Storage and maintenance
Store the light and packaging out of children's reach. The fixture has no replaceable parts.