Quick Start Guide & Warranty English Before using the product This product records videos while the motorcycle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record ALL events. The device may not properly record accidents with small impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the motorcycle’s battery voltage to deviate.
FCC CAUTION: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC ID: 2ADTG-M1 Information to user : RSS-247 This device complies with Industry Canada’s licence-exempt RSSs.
Safety information Read the following safety information to properly use the product. Safety symbols in this guide "Warning" - Indicates a potential hazard, which, if not avoided, may result in injury or death. "Caution" - Indicates a potential hazard, which, if not avoided, may result in minor injury or property damage.
Product overview Ensure that all the items are included in the product box when you open it. The standard items may change without prior notice. Main unit/integrated remote control Front camera Rear camera (power cable included) Mount Quick start guide microSD memory card Check the thickness of each cable to identify the front camera and the rear camera.
Part names The product design may change without prior notice. Main unit Power cable Connect each wire (ACC, GND) to your motorcycle’s battery. Rear camera port Used to connect the product to the rear Remote control camera. Used to control (thin cable) the product.
Front/Rear camera Horizontal reference point Attach the product to the mount based on the marked point Front/Rear camera lens Records the front view. Camera cable Connect to the main unit’s camera port. Check the thickness of each cable to identify the front camera and the rear camera. The front camera cable is thicker than the rear camera cable.
Page 10
Attaching the main unit Attach the main unit to the inner part of the motorcycle, such as the inside of the seat. Firmly attach the product to the motorcycle. The product may become detached while driving if it is not firmly attached.
Page 11
Attach the camera to the mount as indicated by the horizontal reference point, and firmly tighten the screws using a wrench. Tighten the bolts firmly to fix the front/rear camera to the mount. The camera may become detached from the mount while driving if the screws are not firmly tightened.
Connecting the power cable Connect the power cable (ACC, GND) to the motorcycle key-on wiring. • The power cable must be professionally installed on the motorcycle by a trained mechanic. It may result in fire or electric shock if the product is installed incorrectly. • Ensure the wiring is completed correctly after connecting the power cable (ACC, GND) to the motorcycle key-on wiring.
Recording manually You can record a scene you want to capture while driving and store it as a separate file. Operation description Status LED When you press the manual recording ( ) button, a video will be Blue (flickers) recorded for 1 minute, from 10 seconds before to 50 seconds after pressing the button, and stored in the "manual_rec"...
Page 14
Using the THINKWARE CLOUD application You can view and manage recorded videos and configure various product features with your smartphone. Download the “THINKWARE CLOUD” application via the Google Play Store or Apple App Store and install it on your smartphone. THINKWARE CLOUD application does not support cloud service for this model.
Page 15
Connecting via hotspot Turn on the motorcycle or start the engine to turn on the product, and launch the THINKWARE CLOUD application on your smartphone. Tap Dash cam connection is required. at the bottom of the screen. Press the on the remote control and tap connect on the Hotspot connection Wi-Fi( ) button area at the bottom of the screen and tap Configure New Connection.
Page 16
THINKWARE CLOUD application screen Move to the Live view screen. View and play View or configure the recorded videos. dash cam (product) settings. View the product View the connected information. Wi-Fi network or add a new network. Displays the connection status of the product.
Page 17
Settings Connect the product and the THINKWARE CLOUD application and tap Dash Cam Settings on the application. You can set the product features based on your needs and preferences. Options Description • Format the memory card Memory card Managing • Partition the memory card • Configure the video overwriting feature • Set the brightness of the front/rear camera Camera settings...
Specifications Items Specification Model name Front camera Dimensions / Weight 75.3 x 36.6 x 36.6 mm / 167.2 g Rear camera Dimensions / Weight 75.3 x 36.6 x 36.6 mm / 102.6 g 118 x 73 x 26 mm / 254.3 g Main unit Dimensions / Weight (Including remote control (50.1 x 40 x 16.1 mm)) Memory...
Page 19
Warranty THINKWARE warrants to the original purchaser for the reliability. Replacement products or parts will have functionality following period from your purchasing date against deficiencies at least equal to that of the product or part being replaced. in material and workmanship under normal use. Should this Replacement products and parts are warranted to be free unit fail to operate in a satisfactory manner within the warranty from defects in materials or workmanship for 90 days, or for period, THINKWARE will at its discretion, replace or repair the...
Need help?
Do you have a question about the M1 and is the answer not in the manual?
Questions and answers