Redi Shade easylift Quick Manual

View the Easy Lift trimming and installation video at www.redishade/easy-lift.com.
1

Measure

Measure your window width in 3 locations. Use the
smallest measurement.
(Please note our patented cutting scale already takes
into account the clearance deduction for inside mount.)
2

Trim

1
1) Remove bottom rail end caps.
2) Place cutting guide at exact desired width.
3) Position the knife blade at an angle on the top of the shade at your exact measurement.
a) Press firmly cutting through rails and fabric with a rocking motion and constant pressure.
b) Trim each side of the shade to the same exact window measurement.
4) Replace end caps on bottom rail.
3
Install & Operate
a) Peel to remove liner.
©2015 Redi Shade, Inc.
Thank you for your purchase of EASY LIFT.
Customer Service: 1-888-608-6611
What's Included:
Easy Lift Shade with Trimming Scale | Trimming Guide
A smooth kitchen knife with a 3.5" inch blade is recommended.
2
3
(No clearance deduction needed; it's already included).
b) Press firmly across width of
shade to install.
www.redishade.com
4
c) Pull shade down to lower
and push up to raise.
021715