Getting Started; Battery Set Up - TicTocTrack GPS Watch Operating Instructions Manual

BatterY set Up

When you first receive your watch you will need to
charge the battery for 3-4 hours until the charging
icon shows that the battery is full.
You can charge the battery either by the wall
charger with 100-220V DC, or via the USB cable
connected to a computer. Both are acceptable
methods of charging.
*Please Note: Only use the charger supplied with the device.
Damage caused by the use of any other charger will not be
covered under warranty. The battery should be charged when
the device automatically shuts down or the low power alarm is
received. Once the battery is charged disconnect the device
from the charger.

gettIng started

Turn your watch on by pressing and holding the
on/off button for a second. You will hear a tune as
the watch turns on.
6