Advertisement
Parts Required:
● 2 Servos
● 1 1Arm Servo Horn
● 1 2Arm Servo Horn
● 2 Servo Holders (3D Printed)
● 1 Face Piece (3D Printed)
Tools & Additional Materials:
● Hot Glue Gun
● Hot Glue
Use a small amount of hot glue to attach 2Arm Servo horn to one of the Servo Holders
Use a small amount of hot glue to attach 1Arm Servo horn to Face Piece
Step 2: Thread servo wires through Servo Holders
The contacts (metal pieces) should be facing up when you thread the wires through.
QUIZBOT ASSEMBLY
Step 1: Attach Servo Horns
Advertisement
Table of Contents
Summary of Contents for RobotMoose QUIZBOT
- Page 1 QUIZBOT ASSEMBLY Parts Required: ● 2 Servos ● 1 1Arm Servo Horn ● 1 2Arm Servo Horn ● 2 Servo Holders (3D Printed) ● 1 Face Piece (3D Printed) Tools & Additional Materials: ● Hot Glue Gun ● Hot Glue Step 1: Attach Servo Horns Use a small amount of hot glue to attach 2Arm Servo horn to one of the Servo Holders Use a small amount of hot glue to attach 1Arm Servo horn to Face Piece Step 2: Thread servo wires through Servo Holders ...
- Page 2 QUIZBOT ASSEMBLY Step 3: Place Servos Use a small amount of hot glue to secure Servo in place on the Servo Holder. There are two different orientations for the Servos. The neck Servo is placed upright with one side against the raised portion of the Servo Holder. The head Servo is placed on its side with the tab in the Servo Holder’s slot. The head Servo should be placed on the Servo Holder that has the 2Arm Horn on the bottom. Step 4: Assemble Fit the 2Arm Horn onto the neck Servo. Fit the 1Arm Horn onto the head Servo. Step 5: Decorate . ...
Need help?
Do you have a question about the QUIZBOT and is the answer not in the manual?
Questions and answers