Summary of Contents for lab12 true
- Page 1 Owner’s Manual true Handcrafted Passive Attenuator / Line Input Selector www.lab12.gr manual v1.3...
- Page 2 Lab12 true - Handcrafted Passive Attenuator / Line Input Selector Table of Contents It is yours (page 3) Features (page 4) Installation & Placement (page 4) Front Panel (page 5) Rear Panel (page 6) For the safety of your equipment (page 7)
- Page 3 Because in the end this is the only thing we are looking for… Before setting up your new true, we encourage you to read this manual thoroughly to properly acquaint yourself with its features. We love music and audio devices and we have built your new device with emotion and personal treatment.
- Page 4 • Five Years Guarantee Installation & Placement True should be placed on a solid flat surface. You should avoid placing it near a heat source as this could compromise the performance and reliability. You should never place another component directly on top of this device. Make sure that true has an adequate flow of air around Take care of the front panel’s glass blasting anodized finishing using a soft dry cloth.
- Page 5 Lab12 true - Handcrafted Passive Attenuator / Line Input Selector Front Panel TRUE Front panel In the front panel you will find the input selector knob (1) and the level attenuator knob (2). (1) You can select the desired input (3 positions)
- Page 6 The 3-position switch on the middle of the back panel gives you 3 choices about signal ground: Position 1 Both channels keep common ground and both are connected to the chassis of True Position 2 Channel A and Channel B keep separate ground to output A and B without connection...
- Page 7 Lab12 true - Handcrafted Passive Attenuator / Line Input Selector For the safety of your equipment ! Make sure that all your equipment is turned off before any connection. Specifications • Input impedance: 50 kohm • Output impedance: 0 – 50kohm •...
Need help?
Do you have a question about the true and is the answer not in the manual?
Questions and answers