Quoizel COR8410K Assembly Instruction Sheet

Please go to www.quoizel.com
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: (1) Medium Base Bulb 100W Maximum
Estimated Assembly Time:
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Fixture can only be mounted in the direction indicated on page 2.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Package Contents
Crossbar
A
x 1
Nipple
B
x 1
Lock Washer
C
x 1
Hex Nut
D
x 1
Mounting Ball
E
x 1
-
STEP 1 Remove Cage with Glass
A. By using screwdrivers, remove the screw and hex nut from tabs.
B. Unscrew lock screws and remove the cage with glass from the
Fixture Body (F).
F
Screw
Hex Nut
Figure 1
Cage with Glass
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
2017 QuoizelInc.
Assembly Instruction Sheet #IS-COR8410K
for product cleaning tips. Go to the
20-30 minutes
Fixture Body
F
x 1
Tab
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
For Style COR8410K
Care + Maintenance selection.
-
STEP 2 Install Bulb and Cage with Glass
A. Install the bulb onto the socket and screw snugly into place.
B. Place the tab on the cage onto the tab on the backplate and align
mounting holes on the cage to holes on the fixture hood. Secure
them together with lock screws. Hand tighten until snug.
C. Place the screw back onto tabs and secure with the hex nut. Hand
tighten the screw until snug with screwdrivers.
Backplate
Tab
Hex Nut
Screw
F
-
STEP 3 Install Crossbar and Nipple
Lock
Screw
A. Secure the Crossbar (A) to the outlet box with outlet box screws (not
supplied). Tighten until snug.
Green Ground
Screw
1of2
_R1
F
Fixture Hood
Socket Hole
Bulb (not
supplied)
Mounting Hole
Tab
Outlet Box
A
Outlet Box Screw
(not included)
Figure 3
Figure 2
Lock Screw
Cage with
Glass
RevisedDate:2017-11-23